Tuning for a Cam

Stroked777 · May 21, 2013

Gearhead said:
Are temps a little hotter?

surpisingly no, but still smokes like a friend train, i really think it could be spooling alot harder, lugging it down in 5th and when its still smoking it only hits about 1200* and today way 90 in NY

Gearhead · May 21, 2013

Something isn't right... what is boost doing on HD300?

Stroked777 · May 21, 2013

On a flat surface in 5th tc locked I was able to hit 47 psi but that was at 80-90 mph. I mostly see 42

Gearhead · May 22, 2013

are you holding rail pressure?

Stroked777 · May 22, 2013

Gearhead said:
are you holding rail pressure?

yes at about 60% throttle i am holding 26k psi at 2.3ms IPW

madman1234509 · May 22, 2013

what about 100% throttle....

Dzchey21 · May 22, 2013

madman1234509 said:
what about 100% throttle....

If pw is 2.3 it doesn't matter

Gearhead · May 23, 2013

if he is holding that kind of pressure at 2.3ms of pw that is all the fuel you are going to get.

makaveli200369 · Jul 22, 2015

Don't mean to bring an old thread from the dead...did you ever get this problem figured out? I'm curious to what it was.

Stroked777 · Jul 23, 2015

Yeah I got it to run good after some emails with Matt, it was all about messing with the ebp tables and stuff, I was very happy with out it ran.... Now I need a new motor due to a lifter