6.7 EGR Delete Updated w/ Bleed Port

bigrpowr

<How I Fly
Administrator
Joined
May 22, 2011
Messages
15,240
Reaction score
1
Figured this would make filling the coolant take half the time, making the air lock non existant. its a -4 with an o-ring boss. plugs will be black, my sample just happen to be blue. blue can be swapped out if requested.

67egrtopplate.jpg
 

wideroad

New member
Joined
Sep 13, 2013
Messages
23
Reaction score
0
Location
Indiana
So if we ordered a few weeks ago will this be what we get? :D. I'm still praying for a box on my doorstep everyday lol.
 

CoreyMS

New member
Joined
May 5, 2014
Messages
108
Reaction score
0
Possible to get a pass through plate with a bleed fitting as well? I already have the original kit.
 

bigrpowr

<How I Fly
Administrator
Joined
May 22, 2011
Messages
15,240
Reaction score
1
Possible to get a pass through plate with a bleed fitting as well? I already have the original kit.

the top plate is seperate from the pass thru , and they are all built as kits so i dont have floater pieces at the moment. i do stock the pass thru seperate though.
 

wideroad

New member
Joined
Sep 13, 2013
Messages
23
Reaction score
0
Location
Indiana
Sure did, it made the process go a lot faster than what others have mentioned without a bleed port.
 

bigrpowr

<How I Fly
Administrator
Joined
May 22, 2011
Messages
15,240
Reaction score
1
Sure did, it made the process go a lot faster than what others have mentioned without a bleed port.

glad to hear it. gotta thank tadd at elite for that little nugget of a good idea.
 

Latest posts

Members online

Top