Lift with 33s?

crash86

Member
Joined
Dec 26, 2012
Messages
101
Reaction score
0
Location
TX
I recently purchased 20x12 wheels with -44 offset and some toyo mt 33x12.50. The tires rub when I turn more then one full rotation with the steering wheel, so I will need a lift but I don't want to lift the truck too much, just want a better than stock ride. I've been looking into carli lifts and I just want some opinions/pictures of a 2 inch lift on this wheel tire setup. Thanks in advance!
 

crash86

Member
Joined
Dec 26, 2012
Messages
101
Reaction score
0
Location
TX
I think if I even lift front end with a spacer an inch it will clear to be honest. But i kind of like the front end sitting down a bit more, so I was looking to get pictures of a lift but no level basically
 

Cloverleaffarm

Active member
Joined
Aug 1, 2011
Messages
1,255
Reaction score
0
Location
ridge farm, il
Got enough $ to fix the front end when you get all that extra weight sticking out away from the truck putting more and more stress on ball joints, tie rods etc....
 

04cr450

Active member
Joined
Aug 25, 2013
Messages
1,788
Reaction score
0
Location
harford county, maryland
Ahh no worries^ I rode around on 20×12's for a couple years and 60+ thousand miles and never had front end issues. My truck is an 04 though.. love the 12" wheels.
 

crash86

Member
Joined
Dec 26, 2012
Messages
101
Reaction score
0
Location
TX
Yes I plan to fix it if it breaks.. LOL and thanks I agree. Anybody have any pics of a 2inch leveling kit on 33s?
 

B.Warning

New member
Joined
May 23, 2011
Messages
2,255
Reaction score
0
Location
NE Missouri
If your not afraid to do some trimming it'll fit stock height. I run that same setup on my wife's truck.
 

B.Warning

New member
Joined
May 23, 2011
Messages
2,255
Reaction score
0
Location
NE Missouri
Stock height, 20x12 and 33's

e3976631395d948e659871ea8bb0c14a.jpg
 

Powerstroke214

Active member
Joined
Apr 11, 2012
Messages
3,936
Reaction score
0
Location
Baton Rouge, LA
Do a 1.5" spacer up front, IMO 2.5" is too high with 33s. I'd check with Brian first though, and trim like he did, it looks perfect stock height.
 

Latest posts

Members online

No members online now.
Top