What Size Lift?

Garbs

New member
Joined
Aug 26, 2016
Messages
13
Reaction score
0
Looking to run 20x12's with a -44 offset with some 35x12.5 tires. What size lift would be needed to run that on my 1999 F-250? If anyone has photos of that setup please post them. Also if you have 33's post as well. Wouldn't mind getting a look at those as well if the lift needed and possible rubbing is too much in my mind. Thanks!
 

atthelake27

New member
Joined
Jun 24, 2013
Messages
26
Reaction score
0
Location
Oklahoma
You could possibly get by with a leveling kit and a lot of trimming the fender liner might have to adjust the bumper. I have 12 wide on my 2016 same offset and have a 4.5 lift and still had to space my bumper out 1/2". Just depends on how much trimming you want to do. If you went with 33's I'm sure a leveling kit would be just fine.
 

Koda22

New member
Joined
Mar 21, 2013
Messages
827
Reaction score
0
Location
Ruidoso, NM
I would think a 4inch would work....might rub a little but I wouldn't think bad, if you stick with 33s a leveling kit should do it....

Hope by the end of the year that's how my truck will be sitting...4inch lift 22x12 and 35s
 

Garbs

New member
Joined
Aug 26, 2016
Messages
13
Reaction score
0
I would think a 4inch would work....might rub a little but I wouldn't think bad, if you stick with 33s a leveling kit should do it....

Hope by the end of the year that's how my truck will be sitting...4inch lift 22x12 and 35s

I think I am going to do a 20x12 -44 offset with 35's with a 4 inch lift
 

diezelfreak

New member
Joined
May 29, 2014
Messages
315
Reaction score
0
Location
Manchesthair tn
b8e65f20dc9f22c24a0f4e309d477c96.jpg


Here is mine with a 2" leveling kit with a 3" block in the rear. Back sits up 1/4" higher. Mine rubs on the inner fender when turning.


Sent from my iPhone using Tapatalk
 

Latest posts

Members online

Top