CCV o-rings

Jesse_01

New member
Joined
Jul 19, 2011
Messages
1,299
Reaction score
0
Location
Prince George, BC. Canada
Bought a used ccv off of a member. The box got raped by postal service and showed up with a big hole in it. looking for the measurements of the 2 orings that go on the billet pieces.
 

Jesse_01

New member
Joined
Jul 19, 2011
Messages
1,299
Reaction score
0
Location
Prince George, BC. Canada
f5e5176ec1a9be227309d93db462b6e9.jpg


Here is what it looked like when I got it lol.
It was a mpd ccv kit. Is there two different ones?
 

Halvy85

New member
Joined
Aug 14, 2012
Messages
137
Reaction score
0
Location
Bismarck, ND
I believe he was asking if it was for a 6.4 or 6.7. Both of them use the same O-ring as the stock CCV. When you pull the stock one off try not to damage the O-ring when you take it out and you can probably reuse it in the MPD CCV
 

Jesse_01

New member
Joined
Jul 19, 2011
Messages
1,299
Reaction score
0
Location
Prince George, BC. Canada
Oh okay thanks. I thought they would of come with new o-rings with the kit from mpd. I will get the old ones sized up and put new ones it. I don't like to reuse rubbers :)
 

colecoop56

New member
Joined
Jun 2, 2013
Messages
249
Reaction score
0
Location
Cumming, GA
Ya man I understand that hahaha. But ya the original kit from MPD did not provide them. I guess it is probably not good that I have reused them 3 times.
 

Craig@MFI

New member
Joined
May 18, 2011
Messages
2,184
Reaction score
0
The plates are designed to use your factory orings nothing wrong with reusing them



Sent from my 20344 using Tapatalk
 

Latest posts

Members online

No members online now.
Top