Looking for 6.4 Block

Roccafellas

Member
Joined
May 7, 2017
Messages
357
Reaction score
0
I got one for you
I got a crank too, for price of shipping plus $100 you can have it


Sent from my iPhone using Tapatalk
 

Roccafellas

Member
Joined
May 7, 2017
Messages
357
Reaction score
0
Is the block good?! It’s going to be bored .20 over where you located.



Cyl 1 is finished would NEED to be atleast .20 over
e8c1ef16f26687a7451134adfcee52f7.jpg



Sent from my iPhone using Tapatalk
 

Roccafellas

Member
Joined
May 7, 2017
Messages
357
Reaction score
0
Wait a second sorry man I got confused for a sec. i think 20 thousandth of an inch is not enough to take out that gouge. I don’t have a gauge but I think it would need to be sleeved. Keep me as a last resort though if you want? I have the block, bedplate, crank, rods and pistons 2 pistons are garbage for sure, that you would need to get checked. I melted a couple pistons. And i think some connecting rods were bent also so. I rather tell you what happened before you go through with it.


Sent from my iPhone using Tapatalk
 

Roccafellas

Member
Joined
May 7, 2017
Messages
357
Reaction score
0
6756d18e7ac4a26a9a3c93dee2edf5b5.jpg
9c23593ba363b701db9a5f27d51b56d1.jpg
78de70773b3d648e9b49e6e7a460d493.jpg


You can see cyl #1 toast (far right second pic) and piston #2 (far left first pic) eroded

Sent from my iPhone using Tapatalk
 

HossDieselWorks

New member
Joined
Mar 28, 2015
Messages
87
Reaction score
0
Location
Broomfield, CO
Hey There...I am also in need of a block as well. Located in Broomfield, CO just a little north of Denver. Plans for me are to sleeve all the cylinders anyway your block would work for me if gotchadollar doesn't want yours. Can you let me know what shipping would be and I can paypal you or whatever is easier for you!
 

Latest posts

Top