Oil fill tank.

kingbrent1969

New member
Joined
Jul 6, 2016
Messages
6
Reaction score
0
I was taking the oil fill tank off my p8 F250 6.4. While taking it off passenger side valve cover. I broke the small plastic line that connects to the bottom front of the tank. The plastic line goes back behind the coolant fan. I need a part number or a diagram of where this line goes.

Thanks Brent

Sent from my SAMSUNG-SM-G935A using Tapatalk
 

kingbrent1969

New member
Joined
Jul 6, 2016
Messages
6
Reaction score
0
6a22b8beef653ff89b02582f7978dbdc.jpg


Sent from my SAMSUNG-SM-G935A using Tapatalk
 

kingbrent1969

New member
Joined
Jul 6, 2016
Messages
6
Reaction score
0
crankcase vent oil separator is what it's called I think any help be appreciated.

Sent from my SAMSUNG-SM-G935A using Tapatalk
 

Lipka101

New member
Joined
Feb 2, 2014
Messages
586
Reaction score
0
Location
Maryland
Just get a piece of hose that fits over it and a couple hose clamps.

Sent from my SAMSUNG-SM-G890A using Tapatalk
 

kingbrent1969

New member
Joined
Jul 6, 2016
Messages
6
Reaction score
0
From what I can tell the line goes across the front of the engine. Is that correct? Just trying to figure out what all I have to take off to fix this junky plastic pipe.

Sent from my SAMSUNG-SM-G935A using Tapatalk
 

6.4f350

New member
Joined
Mar 11, 2015
Messages
208
Reaction score
0
The line goes down behind the alternator bracket and into the passenger side of the bed plate. It's a drain line from the separator back into the pan. No way to replace it without a lot of work, I just replaced mine with a rubber line.
 

Latest posts

Members online

Top