Dyno Day/Live Tuning in Oregon!

Derek@Vision Diesel

New member
Joined
May 18, 2011
Messages
5,054
Reaction score
0
Location
Canby, OR
0189VDPGrandOpening_FlyerREV2_zpse2f0492a.jpg


Live Tuning information:
  • $125 per/hr with 2 hour minimum
  • Hotel/Airfare will be divided evenly among all getting tuned
  • 15 spots available
  • 6.0l Powerstroke
  • 7.3l Powerstroke
  • Ecoboost engines
  • Most Ford PCM's available for tuning
  • Please contact us to get a spot, VERY LIMITED availability

Dyno Information:
  • $75 for 3 pulls
  • Anything from golf carts to 1000hp diesel motors welcome
  • First come first serve starting at 8am
 

thuglike

Active member
Joined
May 21, 2011
Messages
1,642
Reaction score
0
Location
Linden, NJ
Good luck with the event. I hope it does well. It's good to see Tony getting back at it!!
 

Derek@Vision Diesel

New member
Joined
May 18, 2011
Messages
5,054
Reaction score
0
Location
Canby, OR
Yes we have plenty of hotels near by. Our shop is located right along I-5 so access is extremely easy and there are plenty of large towns near by. Your best bet for a hotel would be the city of Wilsonville.
 

Derek@Vision Diesel

New member
Joined
May 18, 2011
Messages
5,054
Reaction score
0
Location
Canby, OR
Just got off the phone with Jim and it looks as though the Haller's Repair Heart Breaker dyno will be on hand!

Jim and Mike and crew have done an event for us before and we had great results. Can't wait to have them out again!
 

Derek@Vision Diesel

New member
Joined
May 18, 2011
Messages
5,054
Reaction score
0
Location
Canby, OR
We also want to announce for those of you with the 6.6 Duramax that we will be offering No Zone diesel Dmitri Millard's tuning AND transmission builds the week of the event. He will be in town building a few Allisons, so if you are looking for a transmission or needing some EFI live tuning done, please contact us!
 

Derek@Vision Diesel

New member
Joined
May 18, 2011
Messages
5,054
Reaction score
0
Location
Canby, OR
As of this morning live tuning has 2 spots remaining. We are working on a time schedule to see if we can open a few more spots up, but keep in mind once it is full there will be no last minute additions.
 

Derek@Vision Diesel

New member
Joined
May 18, 2011
Messages
5,054
Reaction score
0
Location
Canby, OR
Bump for the dyno! Live tuning has basically come to a close and we will not be accepting any new trucks.

But the dyno is first come first served basis on April 26th.... make sure to mark your calenders!
 

Latest posts

Members online

No members online now.
Top