wanna run mid 13s

Dieselboy.

New member
Joined
Jun 9, 2011
Messages
1,401
Reaction score
0
Location
Surrey B.C.
Fuel system, HPOP, built trans, at least 280/200's, bigger turbo than the D66 would help, Nitrous can push it into that range too

Lay off the payote. That setup would put him in the mid 11s.

238s with either a 100 or 80 nozzle. Stock HPOP or a Terminator T500. Regulated return with upgraded fuel pump and lines. And a s366 on a t4 mount with tunes from your favorite flavour.

Headstuds stiffer valvesprings and pushrods would be a safe bet but arent a requirement.

Add giggle gas and youd crack 12s
 

davey99ps

New member
Joined
May 22, 2011
Messages
1,266
Reaction score
0
Location
Waterford WI
ya i thought about it so but i have a turbo sitting here i just need a t4 mount to go that way

Lay off the payote. That setup would put him in the mid 11s.

238s with either a 100 or 80 nozzle. Stock HPOP or a Terminator T500. Regulated return with upgraded fuel pump and lines. And a s366 on a t4 mount with tunes from your favorite flavour.

Headstuds stiffer valvesprings and pushrods would be a safe bet but arent a requirement.

Add giggle gas and youd crack 12s

Do you really think you need that big of sticks and a turbo to make 400hp? Cuz that's how much hp he'll need to hit 13s.
Op, if I were you, I'd do your fuel system an run your set-up the way it is, you'll suprise a few ppl in this thread
 

smokedout250

New member
Joined
May 18, 2011
Messages
2,654
Reaction score
0
Location
harrisburg oregon
Stage 2s with good tunes e fuel and hpop and turbo will net you 400hp and up! So why not just take it for a run down the track and see what it does!


Sent from my iPhone using Tapatalk
 

Worstenemy453

New member
Joined
Jun 4, 2011
Messages
2,924
Reaction score
0
Location
Fredericksburg, Va
Danny - Woodduck knocked a 13.1 with 300/200's and a stock turbo in an ECLB 4x4.

Id go 238's or 250's and a 66mm as said and you would be good.

PM me if you need some parts man.
 

DZL JIM

Member
Joined
May 18, 2011
Messages
913
Reaction score
0
Location
North East Ohio
Man, you guys seem really ambitious.
How many of you have actually tried to get to 13.50 or lower?
It's not a matter of throwing some hybrids and big turbo on it.

Those that have actually done it know how much time is involved in custom tuning your combination.
 

Worstenemy453

New member
Joined
Jun 4, 2011
Messages
2,924
Reaction score
0
Location
Fredericksburg, Va
Man, you guys seem really ambitious.
How many of you have actually tried to get to 13.50 or lower?
It's not a matter of throwing some hybrids and big turbo on it.

Those that have actually done it know how much time is involved in custom tuning your combination.

Im not trying to be an ass or anything so please dont take this the wrong way, but i would "assume", which could bite me in the ass, that everyone in this thread suggested parts is already assuming that the OP knows that tuning is involved as well. Tuning would be a given for any set-up, so people are just suggesting the hard parts that will get him there. He needs to look into tuning himself.

In my opinion for a 7.3, i wouldnt look much further than Cale @ Tyrant or Matt @ Gearhead. Definitely not knocking anyone else of course.
 

DIESEL SHOP LLC.

New member
Joined
Aug 17, 2011
Messages
219
Reaction score
0
Location
GRISWOLD, CT
Man, you guys seem really ambitious.
How many of you have actually tried to get to 13.50 or lower?
It's not a matter of throwing some hybrids and big turbo on it.

Those that have actually done it know how much time is involved in custom tuning your combination.

me me i have done it haha .there is many of hours or tuneing on my truck thanks john. 12.90s on fuel and the truck was having a good day, it takes alot i mean alot to get there. started at 14s and 13.99s best ever 12.64 on spray. :thumbup:
 

DZL JIM

Member
Joined
May 18, 2011
Messages
913
Reaction score
0
Location
North East Ohio
...that everyone in this thread suggested parts is already assuming that the OP knows that tuning is involved as well. Tuning would be a given for any set-up, so people are just suggesting the hard parts that will get him there. He needs to look into tuning himself......

Well, when you talk with as many people as I do everyday, you'll learn not to assume anything. More people than you think have no clue how important tuning is. It's not a matter of throwing some parts on and go racing, and till now that's all that has been said.
:thumbup:

....there is many of hours or tuneing on my truck thanks john. 12.90s on fuel and the truck was having a good day, it takes alot i mean alot to get there....

Yes sir, exactly.
 

Worstenemy453

New member
Joined
Jun 4, 2011
Messages
2,924
Reaction score
0
Location
Fredericksburg, Va
Well, when you talk with as many people as I do everyday, you'll learn not to assume anything. More people than you think have no clue how important tuning is. It's not a matter of throwing some parts on and go racing, and till now that's all that has been said.
:thumbup:



Yes sir, exactly.

I can understand that, i guess i have been blessed with customers that have a clue so far. LOL
 

blackbetty13

New member
Joined
May 22, 2011
Messages
951
Reaction score
0
Well sleeperduty is trying to advice me to run my truck in DPC for 2013. I will, If and only if I can get out of debt and get a set of crowers and some other bigger modifications
 

Latest posts

Members online

No members online now.
Top