Recent content by 95GTSpeedDemon

Check the wiring from the harness that runs along the frame to the cab, probably got pinched. Sent from my LG-E980 using Tapatalk

That percentage is commanded, not actual, just fyi. Sent from my LG-E980 using Tapatalk

Then its probably the switch. The drivers door harness ground tends to break and causes weird stuff to happen when it sources an alternative ground thru other parts. Sent from my LG-E980 using Tapatalk

Door locks and other master switch items work? Sent from my LG-E980 using Tapatalk

Put power or power and ground directly to the motor? Sent from my LG-E980 using Tapatalk

Desired vs actual makes a big difference. If it reads higher than actual it wont set a code but will run bad. Same for reading lower than actual. A good ford tech who knows what the stock pressures are suppose to be and knows its modified for more pressure will have a better time at finding the...

^These guys are steering you correctly. If it was trans relearn doing weird stuff, it mostly would be shift performance, likely not causing a bog, but the pcm does have total control. Also it would be right after the work was done or programming, not 25mi later. Take a look at app (accelerator...