Recent content by internationalthreat

If it's a copy of another pump, then it should be a good pump. Aren't the adrenaline pumps good pumps??

I've put it back in the groove twice now and it still keeps piping out. I think I'm going to look for a snap ring that will fit. Plus I need to fix the oil leak on the bottom of the pump.

Here's my axles, hoping to get them in the truck in the next couple weeks. Been gathering parts now and had a hell of a time trying to find that driverside lower ubolt bracket, but I found one for $50!! Those things are getting hard to find now.

It was wasn't to bad. Just took sometime. I covered everywhere on the floor, the ceiling, the back wall and the sides. Made a big difference in the sound, but I did notice that a lot of sound still comes from the fire wall.

Might be hard to see, but it started leaking oil and the snap ring is falling out of its grove. Would a seal kit from riff raff or someone be a better option to reseal the leak and use a different snap ring??

Figured I would post up some pictures of what my HB Jr. is doing.

Thanks man!! It's coming along. So I've been gathering parts more then anything lately. Picked up some axles from an 03 F-350 6.0 truck. Hoping to get them checked over in a little bit then put them in. I also picked up a PHP Hydra chip!! Love it so far! I'll get some pictures up asap!!

Well I pulled it all apart again, and low and behold, one small tiny bit of copper was showing!! Loaded in a 80hp tune, cycled the key, did all the steps, and she fired up!! Hit the throttle and there was a puff of black!! She works!! Not that I'm doing this for the smoke, was just making sure...

Ok someone told me to put it into 00 turn off then cycle to on then change to whatever tune, then cycle off, then cycle key on. I'll look for the other hex code and try. Thanks

What's the proper way to get it out of the "no start"?? I'm not sure if I have the proper tunes, i have a BEG8 box code but it doesn't show up in the drop down menu. So I'm not sure what hex code to use. I was told to use VCAB02-02 but no go, didnt work. I've been in contact with PHP through...

With the chip out, the truck starts great. I cleaned both sides accordingly. I can see marks where the chip scratched the silver on the pcm, so it's contacting.

i retinned the contacts so they should have lots to grab and contact now. ill look for that one in the list and see if its there, thanks

Ok so I bought the hydra for my 1994.5 7.3 F-250 ZF-5 4x4, I installed it just like the instructions said. Truck won't start, check engine light comes on, wait to start light does not come on. So I talk with the guy that sold me the Hydra he loaded tunes for an automatic, no big deal. So I...

Well I've been at this truck for sometime and haven't updated the build. I've made great head way. Got it safetied and driving. Fixed all my oil leaks, installed an e-fuel system. I'm loving this truck more and more. Lol. So I stripped the interior and cleaned everything, pressure washed...

Ok so I've been reading and reading, but I can't decide between the adrenaline and the honey badger jr. I know this topic has been discussed, but I can't find a lot of info on the honey badger. I'm plan is to run 238/100 hybrids. I couldn't find to much info on what they will support. I would...