I was just wondering what the gain was if any
I got brand new alliant ac code injectors going in my truck now
the rebuilt stage 1 injectors had ad on the solenoids so I suspected they converted them to single shots I was just wondering what the advantage was that's all
thanks for the info
aren't ad injectors for 99 and up 7.3 and also split shots
what is the advantage or disadvantage making a split shot injector a stage 1 single shot?
im just curious
well the new to be wife bought me new Alliant ac code injectors what a gal god bless
the rebuilds im going to send in as cores and I will take this as a learning lesson
I do want to thank mandkole and garbage mechanic for you guys help
and the rest of you guys for understanding
maybe if the...
I talked to ryan I believe his name is (owner)
he said to check a few things but didn't go into detail
he basically was trying to blame the install or that i had contaminated fuel
or contaminated oil which imo are all excuses in my book
they were very helpful when I was making the purchase...
well the new to be wife is going to buy me new alliant ac code injectors
so I will take buying rebuilds as a learning lesson not to do that again
I see sets with 8 ac code and some with 7 ac code and one ae code wasn't that a bulletin back when for fuel cackle?
which set is my question is the...
well thanks mandkole I was thinking it wasn't good after reading what you said
my stomach dropped so it looks like im going to have to work some overtime the next few weeks to pay to have these gone through just what I didn't want to hear but
it is what it is,, just kinda goes sideways that...
well these are only little guys 160cc stock nozzle injectors
I wasn't looking to make a ton of power and my budget was no more than 5k to spend
which I went over you know how one thing leads to another
but in all reality I was hoping to make roughly 350-360 rear wheel hp
I did upgrade the turbo...
well come to find out my slightly used rebuilds are leaking oil out of the spouts
with no power to them:shrug:
in any case there supposed to be under warrenty 3-4 months old and under 300 miles of use
in any case I need to send them out to a respectable builder
who would you recommend ? and...
well I checked the injectors with a straight edge they are all sitting pretty
I took the spouts off the injectors so I could see if any oil comes out of the holes
that squirts the oil out of the spouts 6 out of eight are leaking oil out of the holes
a few drip more oil than others 2 out of...
well my buddie who helped me told me he used the hold downs to seat 4 injectors
on the pass side any chance that he may have torn an o ring and that is causing loss of pressure to the injectors?
I used a small rubber mallet to do my side and then ran a straight edge across the tops of the...
hello
well i put a set of remnant stage 1 injectors in a couple months ago
along with new alliant valve cover gaskets and injector harnesses
and also while in there new motorcraft glow plugs it had autolites
and i was told to get em out of there so i did
in any case the truck ran good for a...