Search results

Did some searching but couldn't find exactly what I wanted. Just installed 4.5" Carli pintop with deavers on my 13 f250. Going to run 20s and 37s but looking for pics of similar trucks with method wheels or "baja" style wheels. Truck is a white platinum and thinking of going with a grey or black...

Need a set of Carli, maybe icon, 4.5" coils and a set of 4.5" deavers for my 13 f250. Or could I run a set of 2.5" deavers and a block if I found a set of 2.5"? Located in the dfw area.

Thinking of doing 2.5s and icon or Carli 4.5" coils on my truck. Or doing 4.5" coils and a 3 link. Which is going to ride better, 3 link or 2.5 shocks? Thanks Also, can I fit 37s on stock wheels with my 3" lift now?

Looking for a cheap set with 35s or close to it. Tread doesn't matter they are just temporary. Sold my wheels and need a set now. Dfw area in Texas

Have a 3" rough country lift on my truck now with their spacer, radius arm drop brackets, and trac bar drop bracket. The brackets have two holes in them to set the arms at different heights if need be I'd assume. Would it be possible to pull the 3" spacer and put a 4.5" icon coil in instead...

Picked this up the other day. Needs some work here and there but it's pretty much done. 38 cab, custom frame made from 2"x3" tubing, air bags in the rear, solid front axle up front, ford 302 bored .30 over, mild cam, 650 Holley, c4 automatic transmission, lokar shifter. Body has been sand...

Installing a 40" light bar in my bumper and noticed the wires for the fog lights are right by it. So instead of running a wire back to an up fitter switch, could I just tie into the fog lights? Just ground to the frame and find the hot wire to the fogs right? I would assume there is a relay...

Put it all on a couple months ago, just getting around to posting some pictures. Picked up a 3" rough country spacer lift for cheap so I threw it on. Eventually I'll do icon or Carli coils and pmf 3-link. Wheels are 20x10 -19 offset hostil exiles and 35x12.5 toyo mts. Plasti dipped the emblems...

I'd assume yes but just want to make sure. Found a mini maxx with gear head tunes off a 14', all stock except s&b intake. Wanting to put it on my 13' with a no limit intake. Are the tunes specific to a vin number or will it work?

Take offs from my 2013. I believe the tires are original with 55k miles on them, bought the truck used so not sure. Wheels, tires, and tpms sensors $1200 obo. Located in Denton tx, just north of Dallas about 45min. Looking to sell locally first. May ship on your dime.

Got a used 3" lift for my 13 f250 that uses 3" bottom mount coil spacers. Didn't come with the bolts so I need t figure out what size and thread pitch I need so I can get new ones. Thanks

Getting on the highway this morning about 1/2 to 3/4 throttle, running about 70mph, truck went to shift into 5th and just revved and didn't go anywhere. Backed out of the throttle and eased into it again and revved again, was still in 5th. It runs through the gears alright and couldn't duplicate...

Found this kit used for $200. Pulled off to go to a 6" lift. Thought about picking it up, doing a 4" block and new u bolts and running it. Or could I use 2.5" icon coils and maybe a 1"-1.5" spacer with it? Want it to sit level or maybe 1" higher in the front. Don't want any rake. I'll upgrade to...

Going on my 13 white platinum. Going with either exiles or gear alloy big blocks in black and a 20x10, or x12, still undecided on width too. Kinda worried about rock chips and curbs with the x12s, but it's the cool thing to do now I guess. 35x12.50 toyo mts probably. Want to run a leveling kit...

Looking for a cheap 1.5"-2" spacer for temporary use incase my 20x10 wheels and 35s rub too much. Temp until I decide to lift it. Can find supreme suspension kits on amazon for $60-100 depending on what options. Might go that route but want to see what else is out there.

Just want to give credit where credit is due. I ordered his no limit 5" CAI, 5" straight pipe, egr delete with pass through plate, h&s upgrade intercooler pipe, and a 6" exhaust tip a few weeks back. The shipping was extremely fast, he talked me through everything I needed to know and answered...

Have a 13 that I just installed an sctx4 on. Used the canned tunes because I haven't deleted it yet. All stock I put the "street" tune on and went to drive it around. Did a few 25% throttle pulls to about 80mph, then 50%, etc until full throttle. Truck didn't run like I thought it would and...

Chrome westin bull bar that came with my truck. Comes with brackets, ready to install. Great shape nothing wrong with it. $200 located near Denton tx Here's a link to what it looks like...

Picked up this xrt pro but it only works on the 11-12 powerstrokes. Mines a 13. Unlocked comes with everything but the micro sd USB adapter. $900 shipped. Can text pictures. Located near dfw tx.

New to the forum and the powerstroke world. Just bought a 2013 f250 platinum and I couldn't be happier with the truck! Rides great and has plenty of power stock. I've searched some and want a quality lift like icon, pf, bds, etc. Not looking to break the bank with one, just something kinda...