Search results

Truck currently has 6000# springs on the front. Thinking about changing to the 5200#, just curious is it worth it. How different would the truck ride? I dont plan on ever putting a snow plow on the front. 2016 F250 Lariat

Readylift 2.5" lift leveling kit with trac bar bracket. Fits 2011-2019 F250 and F350, brand new in the box. I opened it to make sure all the parts were there. $325. I do paypal.

2016 f250, Put 35" tires and 20" wheels on my truck now I am getting a tpms fault. Tires only had 40lbs in them so I inflated to 65lbs and drove for awhile and light still stays on. What can I do to keep the light off?

Anyone level their superduty with snow plow package? How much lift was used to level?

Went to drive my truck today and it wouldn't move so then I backed up and it moved. Then I drove forward about 10 feet and it moved fine went to back up again and it wouldn't move. Sometimes it will move forward and sometimes it will move backwards. Almost like something is in a bind. I drained...

No wts light but truck starts fine. Recently changed eot sensor is all I did. New glow plugs, new stancor relay. Also no CES lights. Any ideas?

Truck has had white smoke at start up for awhile and until warm. New glow plug relay, new glow plugs, new injectors, new icp sensor. No loss of coolant, no blowby at all, never any loss of power. 38r only has about 5000 to 10000 miles on it. Truck only has 120,000 and exhaust just smells like...

I've installed injectors/oil spouts and I'm getting ready to crank engine over to get the oil out of the cylinders. When I put the driverside valve cover on to keep oil from going everywhere. It wont go all the way on because it is hitting the top of the injectors. I know I don't have the gasket...

Pulled my injectors out to be rebuilt and oil got into the cylinders. Is it ok for the fluid to set in the cylinders for a week or so until I get my injectors back? I would assume so since it's just oil.

Had a problem back in the summer with the a/c blowing out of my defrost only. So I replaced the vacuum pump and the vacuum relay/switch next to it. Now when I start my truck it will blow out of the defrost for 3-5 seconds then switch to the vent, any ideas?

Tried taking the two power steering fittings loose from the steering gearbox and the whole line wants to move. So I held the lines with one hand while trying to unscrew the fittings with the other hand/wrench and now I'm afraid to snap the lines. The whole line wants to move when i loosen the...

Had a shop install a 2" add a leaf to the front of my truck. The position they put the add a leaf in has me scratching my head. Shortest leaf on the bottom, then the next longest, then my add a leaf. What has me questioning the work is that the leaf under the add a leaf is longer. Also the...

My post pump Baldwin filter constantly wants to leak around the filter head. Changed the filter and still keeps wanting to leak. I've tightened down the filter as much as I can. Am I doing something wrong here? Anyone else have this issue? Any tricks to fix my issue?

My front tires are just slightly rubbing my factory front bumper when turning. I'm done lifting my truck, so that's not an option and don't really want to cut into the bumper. So my question is, would I still rub with an aftermarket front bumper(ex: smittybilt, road armor, ICI)? I've never...

I took my factory rear blocks out on my truck and just bolted my leaf springs directly to my axle. The blocks were slightly beveled so I'm guessing I need to shim my springs correct? If so, does anyone know what degree the factory blocks are? Here are a few pictures.

4-2" wheel spacers. 8x170mm bolt pattern. 14mmx2mm studs. Ford super duty 99-04. 150.00 plus shipping. PayPal accepted.

I just want to tell fellow Powerstroke owners about Power-Struck. Got a set of 180/100's installed by them this past weekend and the power and response is awesome. Shifting is perfect! Live tuning, you couldn't ask for any better! And their tunes are the best I have had to date. And I've had...

Anyone have pics of Bushwacker pocket style or Smitty Bilt M1's on their truck. Wanting to purchase them but can't find any good pictures.