Search results

  1. J

    No oil coming from injector spout

    Icp 1500 Fuel pressure at 58psi New cam sensor Fuel pulse .60 If I hold up a gas rag to the intake it will fire off to start but will not run under its own power getting black smoke from exhaust anyone ever run into this Sent from my iPhone using Tapatalk
  2. J

    Motor swap no start

    Did a motor swap in a 02 7.3 to another 02 7.3 installed motor and will crank no start ...icp is at 1500 and fuel pressure at 55 and fuel pulse is at .60 ms .. getting a slight bit of dark grey smoke and the glow plugs are coming on but I am not getting a wait to start light the fuel bowl heater...
  3. J

    Top injector oring

    Did a head job new heads then new seals and oring all the way up even new ball tubes and now we keep blowing out injector orings that are new Sent from my iPhone using Tapatalk
  4. J

    Hpfp failure

    Had customer come in with a stock 2008 6.4 f 350 stalled while driving check ,it has half a tank of fuel ,8 psi on the low pressure side and would only produce 50 psi on the high pressure rail side ,customer didn't want to buy new pump brought in a another hpfp out of his other truck that was...
  5. J

    Slow accceleration

    Got a 6.0 2003 studded new heads power max stage 1 turbo new hpop new injectors new icp 4 inch straight pipe new ficm and custom tunes from dyno proven fuel pressure at 60psi and on wot really laggy like almost no turbo once up at highway speeds it's fine but off the line or driving down the...
  6. J

    Fuel in oil

    95 7.3 powerstroke with 250k on motor fuel found in oil sent of to get checked and for a fact it is fuel, found cracked lift pump bottom at the oring replaced lift pump ,replaced injectors with new ones from swamps and still getting fuel in oil can't think of anything else did a compression test...

Latest posts

Members online

No members online now.
Top