Search results

As title says looking for 2.5" Icon front springs for 05+. New or used

I have a chance to buy an 08 CCSB with 130,000km on it. Body is decent, interior is good condition black leather. A few months ago ford installed a new shortblock under warranty. First time out with a trailer behind it coolant puked out the overflow. It is now back at the dealer only 4,000km...

Can anyone tell me where the power mirror fold relay is located on these trucks. I have installed the mirrors on my 02 and would like to grab a relay from the wrecker I I can locate where it is. Any help would be appreciated.

http://vancouver.en.craigslist.ca/rds/cto/3712060680.html Here's a link to a buddies truck for sale West Coast Canada.

Put a diff cover on last week and noticed two broken bolts holding the carrier together. After picking up 6 new bolts I thought I would be able to fix it today...not so lucky. No such luck :( Luckily a buddy has a few of these diffs. Hoping to get away with changing my ring gear into...

Has anyone flipped the shock mounts around on the diff so they are on the top of the axle tube oppress to the bottom? I currently have a set of bilstein 5100's that are only about a year old. They are pretty much fully extended at ride height presently with a 5-1/2 block. I just got my 7-1/2"...

Looking for Dual Disk clutch pricing for an 7.3 with a ZF6. Looking for something that is daily driver friendly. The southbend 32506 looks like it would be alright, what is the comparable valair clutch?

Looks like my Southbend Clutch is on its way out now. It used to only slip in 4th and 5th on my 140hp tune but now is slipping in 3rd 4th and 5th in my 80hp tune. Can anyone suggest clutches and PM pricing?

Has anyone had any luck getting the 08 gauges to work on a 7.3. I would like to install complete interior including dash into my 2002.

I recently purchased Autoenginuity and am having trouble connecting to the ABS system. This was my main reason for purchase was to change tire size. I have the enhanced ford bundle. It will connect to enhanced powertrain but none of the other systems. I get an error unable to connect or...

Has anyone swapped a 6.4 into an earlier model super duty? With my 7.3 having PMR's it is living on borrowed time. I was thinking instead of building up another 7.3 a 6.4 might be another option worth thinking about. I have access to buy insurance wrecks and could have a complete truck for a...

Last night while returning from a road trip I pushed the clutch pedal in to take off and it stuck down on the floor. I was not able to get it in gear but after pulling the pedal up and pressing it back in again it dissengaged the clutch and I was able to get it functioning again. I checked the...

Finally got to dyno the truck after installing 238/100 injectors with copm 910 valve springs, and headstuds. Put down 460hp/1075tq with Jody's tunes on PMRs :ford:

Has anybody had issues with rear brakes sticking after driving? They slowly start to stick after driving around for a bit sometimes. After they cool off they release and function normally again.

I have injectors, valve springs, glowplugs and Head studs to install. I'm on the fence if I should just lift the cab off to do all the work. The truck has an 8" lift on 37's so working over the fenders is alot of climbing up and down. Any thoughts? I would like to do it all in one weekend...

Has anyone had any luck tightening up their limited slip? I recently swapped out my open rear end for a limited slip and I have not noticed much of a difference. Has anyone had any luck repacking the clutches to get it turning both tires again? Should I just cut my losses and order a locker?

http://www.holley.com/12-700.asp Has any run one of these yet? I was thinking about running this pump to fuel 238/100's with the factory pickup modded to 3/8". I would use the 100 micron pre-pump and 10 micron post pump filter to the factory feed line. Any thoughts?

Has anybody had any issues with front coil springs rubbing sway bar end links through suspension cycling? I noticed my front coils have a slight arc forward, on some bumps they hit the swaybar end links. Is this common? I have a skyjacker 8" lift.

What is everybody using for clutches? I have a Southbend clutch rated for 475/1000. Will this clutch hold the power of 238/100hybrids and 38r?

What are the best injectors to use with PMR's. I have a gt38r and a dp tuner f6. Would like to make 400-450 rwhp. I only want to but injectors once. I was tinking about Swamps 200/30 or maybe Casserly 238's. Suggestions?