Reply to thread

Message: [QUOTE="TyCorr, post: 1020382, member: 1451"] nah. You will be fine. If you can run a ratchet its easy. Check the under valve cover harnesses (uvch) and the glowplugs while you are in there. If you do decide to replace the glowplugs, break them loose with a ratchet then use some 5/8" heater hose, about 5" long to turn them out. If you want to get real crafty you can stick a 3"bolt into the hose and put a hose clamp on the hose to capture the bolt. Then put the appropriate socket on the bolt and spin the hose out with the gp in the other end. Reason being the socket gets caught on the rocker arm pedestal. [/QUOTE]

Verification

Random media

6.4 Fluidampr vs stock

2012-03-27_15-11-13_539

IMAG1039

rear_axle_8_

20121013_131825

photo_1_4

My Boys Are My Life!

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

Powerstroke Racer

Total: 359 (members: 1, guests: 358)

Top