Search results

Ive got intermittent turn/signal flasher failure. And ive got an abs light that comes on and off too. It almost seems like a bump sets it off. Or extreme cold for the hazards/turn signals. Last week there were days in the negatives and after some drive time the hazards/turns would come back. My...

Im looking for a solid black dash bezel for an 05-07 truck. No cracks, huge scratches or gouges. Vents included. 100 plus shipping Or black/woodgrain dash as described above but with the wood. 125-150 plus the ride. Ive been watching ebay and see black ones for 99 + and the others are all...

Anybody know what size block you used to level your truck? I bought a rough country replacement front spring pack and the 3klb rear springs (4 leaves). I have some blocks but they arent configured right. They are for a lift kit so they dont have a hole to receive the pin on the spring pack...

Do you guys have tunes written for a 250/200-38r combo? If so, what tunes? Price and info needed to write them? Pm please! I have a bunch of chips and will mail a good, known chip to you.

Im putting up my 2016 Ford Fusion Titanium. Ive had this car for three weeks approximately. Ordered in November of 15. Every option available including heated steering wheel. Vented and heated seats. 19" dark grey H-spoke wheels. Paint color is magnetic. Ford touch/nav/sync/climate/etc...

I am looking to order a 2016 ford fusion titanium. Im reeeeal close to pulling the trigger. I was asked point blank by the salesman if Ive had it before. I told him our 16 explorer sport has it, my 13 explorer had it but ive used either of those vehicles a time or three. He told me people have...

Yep. Its time again. As redundant as you may think it is, its an evolving market. I have a 17deg pump on my truck right now. My t500 never got any testing time. It was bolted on, moved the truck, took it off to help a friend out. He has paid me for it. Its his. Id buy another one but im not...

Got a eclb 7.3 that is boner stock. Want to add some 160/30s, a turbo, and wonder if the pedestal is the same footprint? How does it differ? Am I stuck swapping to l99-03 stock crap to run a 38r or whatever or swapping to an aftermarket t4 mount?

What are Y'all hillbillies doing to your motors? Rebuilding it like normal but putting billet rods in? Or we talking bed plates and the whole 9? I'm running 250/200s. Would like to turn them up with less worry. Maybe even compound them. Iiiiiiif I ever went bigger on injectors it'd be a...

Hey guys! Im installing a new set of injectors in my 00. I removed the drivers side valve cover after inspecting the turbo and there is rust on the rocker arms and on the very top of the pushrods. Is this from the ccv doghouse not being sealed externally. In the picture you'll notice its just...

Since the rearend is driveline, I put this here. If there is a more appropriate section feel inclined to.move it. No worries. My acquaintance got stuck last night in his e99 f350 eclb 7.3. He was atrempting to extract a plow truck from a ditch. He tried two alternate methods. Both sounded bad...

Got my 250/200s. I was expecting a comment or three about the box my cores were shipped in. Did you get it open yet? They look good. Nice and clean. Cant wait to get them tuned up with some nltd tunes.

I need a billet tstat housing Coolant filtration You done anything more with your billet parts? I know joe was running an improved hpop spacer and I wonderex if there was more stuff available.

Anybody know of some Parker pushloc that is rated for and will handle tranny fluid? For cooler lines? I think some flexible lines would be nicer than the frankenlines ford sells.

Man, I am getting fed up with replacement parts. Even from.ford. I put new motorcraft.calipers on the front of my superduty in 11/11 to replace the ten year old.stockers and they lasted two years and only 15k miles. Brakes have been acting funny since spring. I replaced my rears about a month...

Hey guys! Im going to.ditch the 6" lift on my truck. Its getting worn out and Im not really interested in redoing it. Anyway, id like a heavy set of springs with the overload and hell, blocks(f350 3.5",iirc) if ya got em. So if you have some springs laying around and want to clear em out, let...

Priming a lpop, is done "easily". The directions.that came with mine said to immerse the gerotor in clean engine oil then install. I knew i'd be a while so I used some grease. Mine.still took some cranking to.get to pull oil. My buddy liked my Melling and decided to.get one.for his e99, with...

Ok guys, took my motor out and cleaned it up and resealed everything. Put a new starter in, pulled the glowplugs, and got new battery cables. I have the motor in and the front end is off until I can get it to crank so there isnt oil in the cylinders. Im stuck here. It'll grab and crank for a...

After much hesitation, Im expecting to get some slag for this thread. I have had four exhausts on my 00 superduty over the years. Ive never thought any of them looked quite right. Last Sunday night I installed a 5" aluminized mbrp that I hit.with a scotchbrite pad and the tailpipe got some...

Ordered a new.fuse panel today. The circuit that controls my vacuum pump, reverse lights, etc is gone. Neither of.those functions.work so Im thinking I lost the + or -. Fuse panel.is.green inside with corrosion from windshield leak. Do I have to reprogram anything? One mechanic at the...