Search results

Have a used powermax with roughly 15k on it. Is a little dirty but has no in and out play. 750 + pp and shipping obo [/URL][/IMG]

Have a few parts that i will not be using. 430/250 elite diesel hybrid injectors. have a less than 5 hours run time on them, the last time they were used was in deranged. WILL REQUIRE DUAL HPOP. $1500 W/cores $1800 without. Absolute apex ported manifold. slightly warped, requires spreading...

I am going to be putting traction bars on my 2wd shorty in the next few weeks. I might just build them with a fixed bushing axle side and a jimmy joint frame side. Looking for ideas or pix on what people have done on there rc/sb's for traction bars.

So over the weekend I had my trans rebuilt. I was there watching over his shoulder as he built it and in the forward pack he installed only 5 of the 6 frictions stating that all 6 caused clearance issues and wouldn't fit. Now the issue is my 3 to 5 shift is really harsh, it slams while the other...

I have a engine that I am studding, I pulled the heads and had them gone through and added Rcd valve springs. Now I have installed the heads and put Rcd push rods in. Now my question is how important is the valve train push rod procedure as instructed by the VT 365 Diesel Engine Service Manual?

I work out of town and my cell and internet coverage sucks so I having trouble finding the information I need. 1. What is required of a fuel cell to run on the drag strip. 2. Looking for a 15 to 20 gallon , color doesn't matter. 3. Only can find -8 fuel feed outlet size tanks and I'm running...

Brand new never mounted smeding 66mm non-vgt turbo kit with stainless steel uppipes and turbo pedestal and feed line. $1800 River city diesel 68MM powermax with billet batmo wheel. made close to 600 hp with 205s with this turbo. Great condition asking $1700 obo

New never mounted warren diesel Dual hpop kit. $1100.00 + shipping

What does a used 68mm pmax with batmo wheel go for? Has less than 10,000 miles and was ran with 205/100. Never went over 1650 degrees and oil was also changed frequently.

Set of warren 205/100s worked flawlessly when pulled. Always had valvoline premium blue 15w40 ran in them and 2 bottles of rev-x. Going larger and will not need these. Pm if interested.

What type of metal material, size, gauge is everyone using on there custom turbo piping.

Selling my rcd 68mm batmo wheeled pmax. The only reason im selling is im switching turbo setups. the turbo has just over 5000 miles on it and has been flawless, has had 13 track passes, only twice have i cracked 1650 degrees. Asking $2000 +shipping not sure if im asking to much

Im looking to get a drag racing wheel and tire setup on my truck ( ex cab short bed 2006 f 250) and im looking at some 285/60r17 114v proxes ST ll. The shop I went to cant get toyo and is telling me they wont work, any tire guru's have any info or recommendations.

So a few months ago I got this turbo and sunday I finally put it on. The installation was went really smooth and was able to have it all buttoned up and running in a about 3 hours. I am running stock injectors, stock fuel system, stock everything except exhaust and tuning, extreme street file...

The duramax has compound kits that use the stock vgt. My question is why cant the stock 6.0 turbo be compound? If its backpressure can you wastegate around it and tune the vgt solenoid to work with the gate? Or is it the turbo shaft or thrust bearing? Not something im looking to do just...

Have a 1997 ford 350 and last night the pedal went hard and the brakes barely work when I push really hard. Any ideas?

I tried using this spray on rubberized stuff and i looks horrible, What is eveyone using to paint there frames.

What is the lug pattern on a 1997 f350 powerstroke. Do duramax rims fit on obs trucks.

Has anyone used u-bolts instead of welding the traction bracket to the axle?

Lets see what everyone has got for the records on there trucks. Here is a list of mine 0-60 6.8 1/4mile 100.00s n/a ECT 218 Rpm 4034 Mph 101 TFT 182 Boost 29