ncollins64
Well-known member
Ok guys I may need some help or guidance. Im in the process of building a new engine for my ford prostock 4wd truck. I already have the tube chassis, tilt body, profab boxes, profab axles etc. I hurt the old engine and im going back with an all new engine.
I already have a new set of trick flow A460 heads being built and I just bought a new eliminator premire block. Heres the help im needing, I need to have a crank, rods, and pistons specd out. My cubic inch limit is 485 and im going with a 4.700 bore. Before Bryant can build a crank he needs to know stroke, rod length, wrist pin diameter and it will have a 429 boss snout. Any help is appreciated.
I already have a new set of trick flow A460 heads being built and I just bought a new eliminator premire block. Heres the help im needing, I need to have a crank, rods, and pistons specd out. My cubic inch limit is 485 and im going with a 4.700 bore. Before Bryant can build a crank he needs to know stroke, rod length, wrist pin diameter and it will have a 429 boss snout. Any help is appreciated.