cknox121's slow build

KVD7360 said:

nice

Click to expand...

Thanks.

Trying to get to the track this Thursday


Sent from my cracked iPhone using Tapatalk

Installed this today.


Sent from my cracked iPhone using Tapatalk

Cknox121 said:

Installed this today.

Sent from my cracked iPhone using Tapatalk

Click to expand...

very nice !

bigrpowr said:

very nice !

Click to expand...

Thanks. Install was about 20 minutes. Looks a lot better then the factory, considering all the fins were bent!


Sent from my cracked iPhone using Tapatalk

Anyone else's tensioner do this with the mid west dual fueler kit? Makes a terrible rattling noise. Goes away with rpm increase. Replaced tensioner during build. Only has 5k miles on it. Belts are in alignment. I'm lost. Maybe I just got a bad one. https://vimeo.com/135749104


Sent from my cracked iPhone using Tapatalk

Mine never did, ran smooth

No noises from mine.

Never heard of any issues like that

There are 2 others on FB that have the issue as well.. I'm at a lost. So damn annoying.


Sent from my cracked iPhone using Tapatalk

I have check belt routing and alignment. Checked to make sure balance wasn't slipping (Morgan told me to check) and it still makes the damn noise.


Sent from my cracked iPhone using Tapatalk

Waited an hour and a half for this https://vimeo.com/136300798

Left to hard, popped out of 4wd, then blowed a boot. Need to learn how to drive lol


Sent from my cracked iPhone using Tapatalk

Did you not have your hubs locked?


Sent from my iPhone using Tapatalk

Jbird said:

Did you not have your hubs locked?


Sent from my iPhone using Tapatalk

Click to expand...

Yes...


Sent from my cracked iPhone using Tapatalk

Finally got a decent run. Some 420's should help.


Sent from my cracked iPhone using Tapatalk

Nice.
Glad to see that your getting it figured out.
Any changes since last time you ran?

6.4 Stroker said:

Nice.

Glad to see that your getting it figured out.

Any changes since last time you ran?

Click to expand...

Double clamped hot side and new tunes.


Sent from my cracked iPhone using Tapatalk

Where is it coming apart? Run a tether cable strap between the tube and the CAC horn.

mandkole said:

Where is it coming apart? Run a tether cable strap between the tube and the CAC horn.

Click to expand...

On the hot side right out of the lp. It's clamped very well now lol


Sent from my cracked iPhone using Tapatalk

awesome. i ran a 7.51 with same mph and 1.61 60 ft. with high powers. get that 60ft down and you're flying. congrats .

Little better. Need to practice the launching. Im terrible at this lol


Sent from my cracked iPhone using Tapatalk