Recent content by bjmunderwater

front cover is new, anyone know of the probability of a cracked block pre head stud install? as this was happening before i had them installed .

help me pin point this issue, story is 08 f250 losing coolant into oil. long story short, came back from a three month hitch offshore truck was losing coolant. in the process of pin pointing where it was going i got it to puke out the degas bottle, and discovered coolant in the oil. Steam out of...

Is that black powder coat or paint?

Still have the 59?

59mm Is the 59 available? What the fire sale price?

What the fire sale price on the 59mm?

Thanks

What is the recommend torque for the cabs mounts?

Well pulled the radiator found that it was leaking from under cut from the weld at the end tank to the core about mid way down. Also seems to be about two inches of it.

After starting this thread and the suggested cab mount replacement I looked at mine and doing some research. Position 1 passenger side bottom gone top big chunks missing, driver side still intact but cracked all crazy and falling apart. Position 2 badly cracked falling apart , position 3...

Right on thanks for the info guys, think I finally got this straight thanks to sunrise fords website only one I could find with any kind of drawing and references to what's what. I'll let yall know how it goes .

This my sound redundant but here it goes , position 1 radiator ,2 drivers/passenger feet/ I'm assuming that there are position 3 and 4 would be the next two and be different .

Roger , which is position 1 and 2 ?

Ok cab mounts are toast, and Ford wants a ridiculous amount of money for pieces of rubber. Basically a little over a 100 each set top and bottom. Before I dive into this any tips / tricks to do this at the house with out a lift ? Also IN-STOKER and reason for using the Dorman s over the...

Well ok then looks like I'm in for a treat then