11-14 pickups had fatboy 60 in the front and dana 80 in the rear they used the 17" wheels because ppl whined that the ride was too harsh and the tires cost too much and iirc the f350s actually had a higher payload. the chassis trucks stayed with the s110 and 19.5s Dodge starting offering 4500...
its been almost a yr on filters and flashing almost 5000ish miles ago its about time to change oil and filters
I watched vgt % but not throttle tell after it acted up like I said very random and its like a spilt second thing so it hard to see gauges at exact moment it does it. It hiccup's and...
Ive noticed before on the interstate and odd problem while running 75-80ish that the truck will accel and or decelerate 2-3mph by it self while no terrain changes, wind or pedal pressure changes. Its been a on going thing it did it coming home the day I bought it 3yrs ago 1 time in a 4 hour...
I drilled it out and boy what a mess of a bolt drilled thru and tried extractors and all they did was mill the hole out every time like bolts were lead so kept reaming drilling till I got close to threads and picked material out until I was able to run a tap in to clean rest out anti-seized the...
Hello I have an 08 f450 and the pass side rear manifold bolts snapped of so pulled all down and one stuck out of the block so was able to get out but other one is flush with head so I figured id weld a nut on and get is out as I've done on other trucks but my dad said it a big no no on these...
Ive got an 08 F450 and got a broken rear manifold bolt and was looking around with the inner fender out and looks like can be quite a pain so lets hear the tips, tricks and what to pull to make it a lil easier to get manifold out thanks ahead guys
yes the older kits did use a actual drop track bar bracket but for awhile now they use the offset bracket its cheaper for them to not have to include the pitman arm
rough country does not use a drop its a offset track bar bracket on the 3 and 4.5" kit to retain the stock pitman arm. Put ur stock pitman arm back on and it will be fine ive done these kit with no issue's
You need to put stock pitman arm back on and make sure the offset washers on the track bar are to the passenger side. The track bar bracket does not drop the track bar but moves it over to keep draglink in line with the track bar. The bracket is same on 3 and 4.5 kits because it uses offset...