Search results

so, I have an issue where I have no check engine codes and no rough running issues but if I check codes with the scan gauge it shows codes for cylinder contributions on cylinder 5 and 3. it also has the generic one for the egr ****** but I know why that's there. it has new injectors and I'm...

so iv got a 03 6.0, with in the last 30k iv done injectors, hpop and cooler. my ipr at warm is always 25% and my icp is between 630 and 640. iv noticed when I get close to 3k miles on my oil I'll be sitting at a light and the ipr will go up to 27 to 29 and the truck will sound different. icp...

so another problem with the 6.0, I just replaced the injectors and now I'm getting a p0275 and a p0676. I get the 676 is the number 6 glow plug which wasn't an issue before the new injectors and the 275 is a contribution code for cylinder 5. it doesn't feel like it's missing or idling funny and...

I have a 97 f250 extended cab 8ft bed, I'm looking to do a dually conversion and solid front axle. I have a junked 97 f350 with a dump body that I believe is cab and chassis, can the rear and front axle be swapped? I plan on ditching the bed and building a flat bed I don't know if that matters

so my truck has been idling rough on cold starts here in nj the past few days but seems to clear up when warm. then the other day I noticed it was kinda down on power and getting a shake at like 1500rpm but clears up with higher rpm. I went into the diagnostic on the edge insight and saw a code...

so iv been looking for about a week now and can't find if my numbers are considered normal, at hot idle my icp is in the 630 range and my ipr is usually steady at 25. I just changed the hpop and have been driving it for a few months. truck starts great and i think runs good(iv never driven a...

So my 03 is having a hard start issue, once it fires it sputters and stalls unless i give it gas, once i give it gas it idles and drives fine. I have a brand new ficm installed and gonna check the ipr and ipc also plan on changing the hpop while i do the oil cooler, just curious if it could be...

Are any of these comparable to oem, i know there was temperature issues with the high flow style but what about like rudys one, it doesnt say high flow just that its a direct replacement.

So now that my insight pro is working i can see my eot gets pretty high, iv seen 227 just driving, so im doing an oil cooler and full flush. Iv been looking online and seeing what else i should address while I'm there. Iv got an 03 and it seems some of the stuff talked about is for 04.5 and up...

So what do you guys think about adding an extra cooler in line with a bypass oil filter just for some additional cooling off the oil. I'm doing the bpd relocation kit but figured an external cooler could be a benefit

Anyone have one of these from ********, mine won't take my vin number and just locks up the ignition software when i try. I talked to edge they sent me a new one with no change, its now been almost two months that they've been supposedly working on it with no eta on when the bug well be fixed...

So iv recently got an 03 f250, its ******d and studded with 170k on it. I ordered a insight pro with ******** tunes i have yet to load on the truck, im putting that off until i get an exhaust and gauges. So from some research I'm thinking ill need injectors soon, starts a bit rough and had no...

Anyone use one of these, i like the idea of the stock style cooling that's easier to replace if need be

So coming into to work today i noticed the on light on the shifter for tow mode was flashing and it started shifting hard, even downshifted hard coasting down hill and the tires sort of locked, no lights I the dash were on and the trans is rebuilt with 3k on it. After i shut it off the light...

I just picked up an 03 and i went to get an oasis report and the dealer told me it was to old, is there anyway to get one

ok so i have a 97 f250 that iv finally got the motor how i want, so next is a complete rebuild of the body. my plan is remove and fix the bed, rip out all the interior, new floor pans, carpet, headliner, everything. i also am doing a dana 60 swap and here is where my questions start. i have a...

ok so about a year ago i put a valair clutch in for my stage 1s, about 6 months later my throwout bearing blew on me, so i replaced it. then the replacement started squealing unless you put i little pressure on the clutch pedal. fast forward to last week i dropped the trans to do bellowed up...

my truck is a 97 with intake, full exhaust, stage 1s, tony wildman tunes, and its intercooled, and im wondering if my gauge is broke cause i feel like its running cooler according to the gauge then it used to. my truck a 5 speed with 410 rear and on the highway at like 70mph my temps are around...

iv been emailing him for awhile trying to get some retunes and he hasnt answered, been about a month and a few emails anyone know whats up. thanks and on a side note rebuilding my turbo and i found a kit that comes with a billet wheel, is it worth the extra money

asking 28k 05 keystone raptor 35 foot trailer has garage/toy hauler high class model with high ceilings and nicer cabinets with full surround sound and flat screen can easily sleep 8 full separate bedroom full bathroom and shower gas generator this camper was designed to be able to run with no...