Search results

Do you still have the starter?

Could I get a Price for F3TZ2C342A F6TZ9K061AA shipped to 85365?

RSK is worth it.

Replace the spindle bearing and seals. Most likely it's never been done.

Icon springs?

Here is the article I had originally read that discussed making the big allen key. http://www.pirate4x4.com/tech/billavista/PR-Kingpin/

Metal pistons are better than the plastic ones as long as your not in the rust belt. There are pro's and con's to both. Plastic pistons will not absorb nearly as much heat as the metal ones, this keeps all the heat at pad and rotor and can increase brake fade. Metal pistons will transfer...

I had a '93 Dodge W250 with a kingpin Dana 60 up front and when I bought it one of the front tires leaned in, the top of the tire was about .25" closer to the body and the bottom was .25" out. This caused some irregular tire wear. The fix is to replace the spring and bushing at the top of...

I'm guessing that I'm going to be the first to try and install one on an OBS?

I've got a International tube, and can post a picture up later if you guys want. It is the same thing as the CCV mod, but it is the OEM solution to it. (this is what the T444E was meant to run)

Anyone ever run one before? Truck is a 97 CCLB F350 4x4, 7.3Lw/ZF5. I've got one and it has several brackets that are supposed to mount it to the backside of the block, question is what bolts do I need? Can someone post a picture of the backside of the Driver-side Head?

I'm in Yuma and have you you can borrow, not sure how I'd get it to you though.

Looking for a shipped to 85365 price on 2 door strikers. for front driver and passenger doors. Truck is a 97 f350 crew cab 4x4.

So you would recommend springing for the OEM ford ones?

Here is a link to the total auto hinge kits: http://www.hingekits.com/search/FORD/1996/F-350/4%20Door I wonder if the nut on the bottom will help to pull the hinge tight similar to the staked OEM pin.

What is the general consensus of Dorman hinge pins and strickers vs OEM striker and Total Auto hinge pins? The price difference is substantial. Doorman Pins: $6 Striker: $11 OEM Striker is $20 from Autonation Ford total auto hinge pins kit is $35 I tend to shy away from dorman products...

Can you post a picture? There is a vacuum block that is on the Driver Side inner fender and it has lines that connect it to the Vacuum pump on the engine, the brake power booster, and then a smaller line that runs on the firewall over the top of the engine and enters the cab behind the glovebox...

Not sure if it helps here, but I used to own a '93 Dodge W250 w/ the cummins. The 1st Gen dodge's only had 1 Large Battery, 1350 CCA if I recall correctly. I had to go to the local Rush truck center to buy the battery, and I was told it was the same one used in the big rigs. While it is not a...

Anyone got a Partno for a manual?

Is F6TZ-6068-B specific to an auto transmission?