-12 Offset Pics

maxrpower · May 1, 2015

Wanting to see what a -12 offset wheel either 20x9 or 20x10 with 35s looks like on a leveled rig. Will mudflaps fit with this setup?

997.3psdiesel · May 2, 2015

20x9 -12mm offset. 35x12.50x20. Stock Height. 2010 F250

maxrpower · May 2, 2015

That looks awesome! Do you have any rubbing issues?

Sent from my iPhone using Tapatalk

997.3psdiesel · May 2, 2015

At full lock it would rub the carpet like stuff of the fender well. Not terrible but I cut it anyways. I'll get another pic later

jgerdes2005 · May 2, 2015

my 2008 f250 is has a 2" level with 18x9 with a -12 offset on 35s and it rubs at full turn on the inner fender well. you would prolly have to modify mud flaps to fit

DWhite · May 2, 2015

[img src="http://powerstrokearmy.com/photopost/data/500/medium/20150219_181621-1.jpg" /]

Edit.

Pic isn't working
http://powerstrokearmy.com/photopost/data/500/medium/20150219_181621-1.jpg

20x9 35 12.50s stock height.

997.3psdiesel · May 2, 2015

Cut a little on both sides and now it's doesn't rub

Riverside · May 2, 2015

Leveled on 35s with 20x10 I think either 12 or like 18 offset.

maxrpower · May 3, 2015

Thanks for the help guys, I absolutely love the stance Riverside! What leveling kit did you use?

Riverside · May 3, 2015

2.5 icon level.
Truck is a f350....has factory blocks So the 2.5 level is perfect

Tom@BigTimeKustomz · May 3, 2015

Riverside, do you have plow prep in your truck? I did the 2.5" level on my '13 350 and it sits nose high. Have a 5" block inbound to fix the problem. Just curious...

Riverside · May 3, 2015

Not that I'm aware of.

For whatever reason mine sits just a tad high in the rear to looking dead level pending on the angle

Tom@BigTimeKustomz · May 3, 2015

Thanks for the reply. Mine is probably a half inch lower in the rear, so the taller block will give it that factory rake and it won't look goofy with the bed loaded or when towing.

DWhite · May 3, 2015

Tom@bigtimekustomz said:
Riverside, do you have plow prep in your truck? I did the 2.5" level on my '13 350 and it sits nose high. Have a 5" block inbound to fix the problem. Just curious...

I did the 5 inch block with the 2.5 leveling kit on my 6.7 and it sits perfectly level