Antrim Diesel Days Hagerstown, Md

F250stroker08 · Oct 28, 2013

Beans71086 said:
LOL
We will see, gunna do some testing in the next couple weeks to try to figure this out. 13.0 is way to slow.

They had a slowwwww rclb 6.7, two duramaxs, one was in the mid 12s, and there was a 6.4 there with a big CFD sticker on the back glass. It had a single stack coming through a bed cover. The bed cover had a **** ton of oil on it right behind the stack. LOL It wasn't racing though.

Their 6.4 made a pass Saturday but the transmission was having a terrible time shifting. Went mid 13's I believe.

Mike@MPD · Oct 28, 2013

The was kennys with a 2800 stall lol

Sent from my SCH-I545 using Tapatalk

Beans71086 · Oct 28, 2013

I was wearing my psa hoodie, you should've seen the double takes and glares I was getting from them.

Beans71086 · Oct 28, 2013

Mike@MPD said:
The was kennys with a 2800 stall lol

Sent from my SCH-I545 using Tapatalk

Does it have an awesome CFD single kit on it?

Mike@MPD · Oct 28, 2013

75/96 lol

Sent from my SCH-I545 using Tapatalk

strokersmoker · Oct 28, 2013

Beans71086 said:
I was wearing my psa hoodie, you should've seen the double takes and glares I was getting from them.

I don't think anyone actually noticed you, but you should have stopped over and said whats up.
We ran 13.1 @116 mph so some help with traction out of the gate would have been great. It was a great time and we will just keep practicing.
No hard feelings though so I really hope you don't think we were staring at you. We are all good guys trying to have a good time.

How much RWHP does the 116 trap speed equate to. My butt dyno is just plain broke?

UPINSMOKE · Oct 28, 2013

strokersmoker said:
I don't think anyone actually noticed you, but you should have stopped over and said whats up.
We ran 13.1 @116 mph so some help with traction out of the gate would have been great. It was a great time and we will just keep practicing.
No hard feelings though so I really hope you don't think we were staring at you. We are all good guys trying to have a good time.

How much RWHP does the 116 trap speed equate to. My butt dyno is just plain broke?

Just from my head at 7000lbs I believe it's around 750..

6500 lbs is prolly 688hp or so.

What's it weigh?

2wd truck will trap higher speed per the et... But I dunno if it makes a diff power wise

strokersmoker · Oct 28, 2013

UPINSMOKE said:
Just from my head at 7000lbs I believe it's around 600...

6500 lbs is prolly 550hp or so.

What's it weigh?

It weighed 6600 off the show room floor when we got it from the dealer.
We deleted the normal stuff plus we have a fuel cell .
We took about 400 pounds off.

Lets call it 6100 to be safe.

The dyno said it was 626 rwhp on friday night.

UPINSMOKE · Oct 28, 2013

strokersmoker said:
It weighed 6600 off the show room floor when we got it from the dealer.
We deleted the normal stuff plus we have a fuel cell .
We took about 400 pounds off.

Lets call it 6100 to be safe.

The dyno said it was 626 rwhp on friday night.

Calc says 646

Went back and edited my original post with actual numbers since my memory was way off originally

strokersmoker · Oct 28, 2013

UPINSMOKE said:
Calc says 646

Thats pretty close than.
It cleans up in the end, we just gotta get her out of the hole.

We still are stock engine stock trans and stock injectors.

Did you make it up for the race?

Mike@MPD · Oct 28, 2013

Caltracs and a harder launch

Sent from my SCH-I545 using Tapatalk

Mike@MPD · Oct 28, 2013

That converter is killing kennys truck

Sent from my SCH-I545 using Tapatalk

UPINSMOKE · Oct 28, 2013

strokersmoker said:
Thats pretty close than.
It cleans up in the end, we just gotta get her out of the hole.

We still are stock engine stock trans and stock injectors.

Did you make it up for the race?

For a couple hours yeah

strokersmoker · Oct 28, 2013

Mike@MPD said:
Caltracs and a harder launch

Sent from my SCH-I545 using Tapatalk

Mike@MPD said:
That converter is killing kennys truck

Sent from my SCH-I545 using Tapatalk

Yeah justin craig and tj were talkin about that.
Kenny may do a lock up switch if it don't snap the shaft.

caltracs and remove 2 leave springs.
The load sensing porpotioning valve is not applying enough pressure to the rear calipers if you watched the wheels start to spin before we could build boost.

We basically gave up and just started at zero boost.

Maybe next weekend at mir.

Do you think if we go to MIR we will actually get track time?

strokersmoker · Oct 28, 2013

UPINSMOKE said:
For a couple hours yeah

Cool there were some quick 7.3's up there!

Mike@MPD · Oct 28, 2013

Its a while to run

Sent from my SCH-I545 using Tapatalk

Beans71086 · Oct 28, 2013

strokersmoker said:
I don't think anyone actually noticed you

Lies, I was the only fat guy in a psa hoodie, I watched you stare at me like I was a piece of meat. LOL

The white duramax was running good though, it ran my buddy's 6.4 in the quick 8 qualifying. Didn't expect it to crack off that 12.5.