EAS for 6.0L CTS fuel pressure monitoring

[scorpion67]

Hi guys i hope this is the right place for this... I was wondering if Edge eas sensors would work for fuel pressure monitoring on my 6L i have the cts in and have a egt probe on the eas so im all setup for that route if its possible....! Or would there be majo drawbacks that im not seeing?? Thanks so much guys!!

 

[Strictly Diesel]

If you have the EAS (expandable) starter kit already, you just need the 100psi sensor and the universal sensor input.

https://www.strictlydiesel.com/p-3020-eas-100psi-pressure-sensor-98607.aspx

https://www.strictlydiesel.com/p-3019-eas-universal-sensor-input-98605.aspx

Hook those up and power up the unit. It won't see them, but you have to do that first. Then take the CTS in to your computer, hook it up and launch the "MyStyle" software. You will need to tell it what sensor you put on, and configure the name. Easy stuff, works great!

 

[scorpion67]

Ok! Thanks so much!!