You guys ever seen this code I was getting ready to bust it off with a friend of mine I left at about 1600 rpm tires broke loose and then tacked to redline and didn't shift, then it shut the truck off immediately. Fired right back up
Excessive speed code
- Thread starter hunter_.b
- Start date
ramonpowerstroker
Member
Did that on mine, spun it to like 4300 somewhere around there, got the code and just deleted it
ramonpowerstroker
Member
It didn't shut it off, that's the only difference, I have no idea why it would shut off, I know it threw an engine code.
20156point7
Member
that happened to my truck too when I was spinning on ice and it shut off. I wonder what would cause this
20156point7
Member
it shook me up too I thought the motor gave out
oxcobra
New member
Mine has done it too but not in awhile. It's cause by short burst of tire spin or harsh down shifts. It's basically a communication error between the output speed sensor on the back of the motor and the rear end. Basically they don't agree with each other and call for a shut down to avoid hurting hard parts. Hope that helps and I wouldn't worry about it unless it continues to occur
20156point7
Member
I figured it was some safety measure
nannichenni
New member
- Joined
- Feb 26, 2015
- Messages
- 41
- Reaction score
- 0
Same thing happened to mine I just cleared the code and haven't had anything since. Happened when I was spinning on ice also.
lincolnlocker
Well-known member
prolly shouldnt be ***in around if you guys are gonna get a lil scared of what migh and very well could happen.. lol! ok dad post over..
live life full throttle
Members online
No members online now.