Injector removal

2006nytro · Feb 7, 2012

Ok pulling the injectors out of my dads truck tomorrow. Just want to make sure I'm 100% on the proses I think I have it
Down but if some one can run me through it I would appreciate it thanks..

RoadWarrior · Feb 7, 2012

dissconet batteries, remove valve covers, unplug injector wireing, unbolt both injector bolts on all injectors, number which injectors go to which cylinder if your are putting them back. (i dont know what your doing). pull the injectors and have a crap load of shop towls or a small tube with a vacume to suck all the oil out of the injector hole so it doesnt leak into the cylinder. Thats basiclly it as far as pulling them.

95powersmoker · Feb 8, 2012

Only unbolt the bottom injector bolts... The collar will slip over the top one... Also, remove the oil spouts, they tend to crack if you pry on the injectors with them on... Pull the two rear ones first and let them sit for about 5 minutes, that will leave all the fluids in the rear cylinders and you can suck them out before reinstalling.