MY BUILD

[e.nickkk]

This is my build
1.rcd rods
2.ported heads
3.ported intake
4.rcd push rods
5.rcd valve spring
over sized valves
6.mad turbo
7.regulated return
8.fuelab fuel pump and filter
9.dahl 200 filter/separator
10.175/75 injectors
11.egr cooler delete
12.coolant filter
13.edge cts/fuel pressure/egt
14.hellman sump
15.bullet proof ficm 58v

 

[e.nickkk]

picture

 

[Bigcountry250]

Should be a fun truck to drive!!

 

[e.nickkk]

anyone see anything i'm missing?

 

[Super08Duty]

Ever thought about doing a cam while the motors out? And why only 175's?

 

[e.nickkk]

I'm going to be towing from time to time and didnt want to go bigger injectors

 

[Dieselcraft]

like the up pipes and manifolds.

do you think the porting on the heads is going to help?
why not just do a cut up intake?

will be a bad ass truck in the end

 

[Sniper32]

Looks like itll be an awesome ride...but...Why arent you doing any trans upgrades while you have it apart? With all that youre gonna be pretty hard on a stock trans. I would think atleast a new tq converter and the gogo shift silenoid, but thats just me

 

[TooMuch03]

Sounds like a good build. I second the question about the cam. Also, what is the reasoning behind the rcd rods? I highly doubt that combination will make enough power to be a problem for the stock connecting rods. Just curious, should be a fun truck

 

[e.nickkk]

The rods are for future f1 kit trans is already done suncoast forgot to list

 

[java]

Nice build, I agree on the cam suggestion.

 

[Super08Duty]

I think 190/75s with a cam and cut intake mani would be a great daily driver/tow rig. Awesome build sheet for sure.

 

[MorganY]

Ported heads are going to give you some benefit, but the manifold is the next line of restriction. You would see larger gains with a ported manifold as well.

 

[Pizza pig]

Guys read the post, and look at the pics... he has Steve's apex on there. LOL This is going to be a sweet setup man.

 

[MorganY]

Dammit, I always do that:fustrate:

 

[Breaking Habits]

This is my build
1.rcd rods
2.ported heads
3.ported intake
4.rcd push rods
5.rcd valve spring
over sized valves
6.mad turbo
7.regulated return
8.fuelab fuel pump and filter
9.dahl 200 filter/separator
10.175/75 injectors
11.egr cooler delete
12.coolant filter
13.edge cts/fuel pressure/egt
14.hellman sump
15.bullet proof ficm 58v

Nick,

Who'd you buy the rods from?

 

[BlueWaffle]

Nick,

Who'd you buy the rods from?

ol Jared sniffin around for that commish imp:

 

[java]

When I had a cam it spooled awesome! If I ever tear down this motor I would put one no questions asked.

 

[Breaking Habits]

ol Jared sniffin around for that commish imp:

Lol. No i just didnt remember sending out rods. I manager all of our outgoing parts as well

 

[e.nickkk]

Jared what is the cost of the cam and do u stock them or should I check with mpd. By the way when u had me call buddy for the rods n springs he was able to hook me up fast thanks for helping me out with everything