PMF Traction Bars for LongBed New

[Wired1]

Cleaning out the shed. Found these off my old f350. The Bars are new never installed. Had them made for my 06 that was a long bed.

If you need blocks,I have a set of used PMF 8.5" blocks as well. Blocks have ware and tear, and could use a new powder coat job. 5 deg correction, and bump stops.

Asking
250.00 + shipping and fees for the PMF Traction Bars
100.00 + shipping and fees for the PMF blocks.

 

[Amicus]

Do know if these would work on L99 f350?

 

[Wired1]

Should work on a late 99. as the rears were the same 99-07. It was the front that was funky on the 99's for lifts.:toast:

 

[Wired1]

All PM's replied to.:toast:

 

[POWERSTROKE_GOD]

Sent you a pm

 

[Warrenexner]

Will these fit a shortbed truck you think??

 

[Wired1]

Will these fit a shortbed truck you think??

Don't think so. But you would have to call PMF to find out for sure.

 

[Amicus]

So do you need to 8.5" blocks or will this work with stock height?

 

[mikeeg02]

Location?

 

[Wired1]

So do you need to 8.5" blocks or will this work with stock height?

You would have to get a stock height block made to accept the traction bar from PMF.

Location?

ABQ, NM

 

[Wired1]

Sale pending.

 

[slowcoupe]

Do you by chance have the u bolts for the blocks?

 

[Wired1]

Do you by chance have the u bolts for the blocks?

I do but they went with the blocks.

And everything is sold!:thumbup: