Pro Stock Powerstroke Mustang

Cutting-Edge Diesel

Active member
Joined
Feb 10, 2012
Messages
5,738
Reaction score
0
Location
Newkirk, OK
Here is the high pressure location/set up I'm planning. The atmospheric chargers if we do triples will ether be behind the front tired or in front of them on ether side.

841C-CC547124D020-873-0000011C77B37889_zps9ac29d28.jpg

B445-96405F07C6C7-873-0000011C77601174_zps0f2baf18.jpg
 

Cutting-Edge Diesel

Active member
Joined
Feb 10, 2012
Messages
5,738
Reaction score
0
Location
Newkirk, OK
Should add that 6.7 was very high on the list of contenders but we were worried about the R&D associated with that swap and slowing us down as well as making the reliable power we were looking for
 

bigrpowr

<How I Fly
Administrator
Joined
May 22, 2011
Messages
15,240
Reaction score
1
Should add that 6.7 was very high on the list of contenders but we were worried about the R&D associated with that swap and slowing us down as well as making the reliable power we were looking for

I had a very similar project slated in 2008 .. its such a great platform. suspension tuning will prolly be the hardest part !!
 

ChattyCathy

Active member
Joined
May 18, 2011
Messages
4,809
Reaction score
0
I had a very similar project slated in 2008 .. its such a great platform. suspension tuning will prolly be the hardest part !!

Big undertaking to make everything work together over and over.

Good luck Matt!
 

Cutting-Edge Diesel

Active member
Joined
Feb 10, 2012
Messages
5,738
Reaction score
0
Location
Newkirk, OK
I had a very similar project slated in 2008 .. its such a great platform. suspension tuning will prolly be the hardest part !!

Yup I figure getting the trans set up right and the chassis perfect will be our biggest challenge. We have learned a lot tuning the 4 link in the ranger but I still think we are going to seek professional assistance when dialing in the chassis for my safety as well as the cars performance
 

SDS97_7.3

Active member
Joined
May 18, 2011
Messages
4,945
Reaction score
0
Location
Finksburg, Maryland
If you're not keeping banana hammock yellow I say gun metal grey all over and work in the bright green you've used and add metal flake to the green.
 

Latest posts

Members online

Top