Rough idle updated with Torque App teadings

[LiftedBlackHD]

I started a thread a few weeks ago about a rough idle condition. I finally got the torque app and here are my findings.

I'm experiencing a rough idle with longer than normal crank times. I was hoping these numbers would help diagnose the problem. I have a P2285 dtc which is ICP. I replaced the ICP sensor a few years ago. Is it bad again?

I got the torque app and have the following readings:

HPOP/ICP-908
VBATT-14.2
IPR-32
FICM/FMP-44.5-45 at start up 46-47 after a few minutes
MAP-15.12
INJECTION PRESSURE REGULATOR DUTY CYCLE-32.86%

Any ideas?

 

[LiftedBlackHD]

Ficm, icp, both or other?

 

[Cope102]

i would say its your icp sensor. but to me your ficm voltage seems a bit low. my torqaue app i show 46 volts @ crank and average 49.5- 50 once idling.