Running rough

[onebad7.3]

Early 99 running rough code P1316
Did buzz test, said low to high side open on 2,4,6 injectors
changed UVCH with known good one, no change. Are those three injectors bad?

 

[Brad.S.19]

ohm the circuit, all connections good, how many miles, and stock truck or mods present. The bottom of the 42 pin connector can rub on the vc check the bottom wires and the connector to the uvch check to see if the tension on the clips make a good connection to the harness.

 

[onebad7.3]

ohm the circuit, all connections good, how many miles, and stock truck or mods present. The bottom of the 42 pin connector can rub on the vc check the bottom wires and the connector to the uvch check to see if the tension on the clips make a good connection to the harness.

165k stock

What should the circuit ohm?

 

[Brad.S.19]

165k stock

What should the circuit ohm?

anything less than 2 ohms anything more change the wire.

 

[onebad7.3]

anything less than 2 ohms anything more change the wire.

Sorry for the stupidity here, what exact wires am I ohm testing?

 

[Brad.S.19]

Sorry for the stupidity here, what exact wires am I ohm testing?

To be honest I do not have the diagram to show exactly other members here have them. I beleive i found the one I have used on google images or a rudimentary search.