SPE makes 1230.4 HP on FUEL ONLY!'

[SPE]

We worked on the tuning for the race truck today after being asked by so many people why the torque number was off. We also wanted to see if we could get the truck to light earlier and make the torque number it should. Due to the short rev range of the 6.7 and the large turbo setup we couldn't get the eddy brake to snap on early enough by itself to load the truck properly so we applied the Dyno load along with the foot brake in an attempt to get the torque on. Here's what we got. This is fuel only with SAE corrected, smoothing 4, and a lot more load. Highest number was 1230.4 HP & 1982.3 TQ on FUEL ONLY!!!! This run was 1197.4HP & 1916.6 TQ. Both ran with nitrous off. The videoed run was slightly lower since the truck was doing back to back passes & getting warm.

https://m.facebook.com/story.php?st...4&ref=m_notif&notif_t=like&actorid=1404444300

 

[01PSD]

wrong video LOL
Edit: the video is only 15 seconds.. but on FB the full length video works

 

[01PSD]

Almost sounds/looks like it's blowing the rear tires off

 

[SPE]

wrong video LOL
Edit: the video is only 15 seconds.. but on FB the full length video works

Edited. Thanks!

 

[Cknox121]

***k the haters on face book!!


Sent from my iPhone using Tapatalk

 

[01PSD]

It's all gonna come down to the track numbers

 

[Spatel23]

impressive

 

[01PSD]

Is it still not fueling all the way out past 3800 or are the turbos really destroying those 60% over injectors? LOL

 

[jdgleason]

Sweet.

 

[ncollins64]

Very nice. Wonder what the bottom ends can take now?

 

[01PSD]

With a set of carillos hopefully a lot more LOL

 

[Crack85]

Nice

 

[Jgon08]

Impressive numbers forsure.