benjamindurtka
New member
- Joined
- Mar 7, 2016
- Messages
- 251
- Reaction score
- 0
I'm getting a slight vibration while driving, gets worse under a load and making hard turns. Hubs and u joints on front end are new.
It's starting to pop out of 4 wheel low and makes a loud bang when it does.
When I turn it makes a pop/clunking noise.
I just serviced the front differential and everything is tight.
I checked the rear differential because the turning had me thinking it may be that but everything is tight there to.
Drained the transfer case and the oil is a little dark but not a spec of metal or anything.
There's atf at the front of the transfer case, not enough to drip but if you clean it off (in the past I have) it comes back.
What else can I do to check the transfer case? Maybe put it on Jack stands?
Thanks for any replies.
2001 F-250 cclb
7.3l 4x4
forged rods,
ebpv, muffler, dp80hp dd.
It's starting to pop out of 4 wheel low and makes a loud bang when it does.
When I turn it makes a pop/clunking noise.
I just serviced the front differential and everything is tight.
I checked the rear differential because the turning had me thinking it may be that but everything is tight there to.
Drained the transfer case and the oil is a little dark but not a spec of metal or anything.
There's atf at the front of the transfer case, not enough to drip but if you clean it off (in the past I have) it comes back.
What else can I do to check the transfer case? Maybe put it on Jack stands?
Thanks for any replies.
2001 F-250 cclb
7.3l 4x4
forged rods,
ebpv, muffler, dp80hp dd.