ZF 6 tranny swap auto to manual

[mbaker54]

Just swapped. Everything works except truck won't start??? I know electrical... Not sure what tho. Any ideas? :cursing:

 

[sootie]

neutral start switch?

 

[mbaker54]

By passed the wiring. Can't figure it out. Everything comes on to start. But won't turn over.

 

[mbaker54]

Pcm from manual. Just don't know what wires to jump... Tried all of them but still doing something wrong. Trying to find out which wires exactly to jump off the clutch pedal safety switch......

 

[ford_trck]

You have to jump 2 wires for the clutch pedal. 1 jumper is to start it and the other is so you can still have cruise control. I jumped them on mine because I was tired of replacing the switchs. I just don't remember off the top of my head which ones they were

 

[mbaker54]

That's the problem I'm having. Can't figure out which wires.

 

[ford_trck]

If I remember right the 1st two wires go together and the 2nd two go together.

 

[mbaker54]

Trying to add photo of mine. Different color wires.

 

[mbaker54]

I have red w/yellow strip. Tan w/light blue. Blue w/ orange. White w/ pink.

 

[mbaker54]

Just tried jumping the starter. Nothing

 

[mbaker54]

 

[mbaker54]

I'm done. I'm putting the auto back in. Thank you for trying

 

[ford_trck]

If you jumped the starter itself and nothing happened then you need to look there.

 

[6.0 Tech]

:whs: Sounds like your starter died or you didnt hook up the batteries or somethin. Did you jump it right at the starter or did you use the inline connector up by the battery?

 

[co04cobra]

What year truck? 01?