Recent content by 6.4f350

  1. 6

    ALRADCO!!!!

    I went through 3 v1 Mishimotos. OEM radiator back in now, have 10,000 miles and almost a year and a half on it. Solid aluminum is just not a good option for these trucks unless you drive on 100% smooth pavement 100% of the time.
  2. 6

    Trans Issues...Input Appreciated.

    Can try swapping solenoids but most likely the trans is done.
  3. 6

    How to use heated mirrors?

    My 08 has a button on the dash
  4. 6

    Arp main studs.

    Doesn't hurt anything to pop them in and see what it looks like. I'm sure if you dig hard enough you can find a Ford/International spec on line boring, if you would need to go that route. There has to be some allowance in the location of the crank and cam, not all of these blocks are going to...
  5. 6

    6.4 Fummins

    You'll have 2-3x the money, time, and problems in it as you would with just putting a 6.4 back in. I don't see any real benefits to it either, other than just to say you did it.
  6. 6

    When is it needed? BOV

    No throttle body on a diesel. Just don't chop the throttle after you're really into it and it'll be fine. If you hear the turbo barking, that's pretty rough on it.
  7. 6

    Injector tube replacement - need to pull injectors???

    Why are you replacing the lines if you aren't pulling the injectors? You can leave the injectors in, maybe just loosen the hold down bolt so they can wiggle a bit. Probably wouldn't hurt to change the crush seal and o-ring on them if you're replacing the lines though. Torque is the same for...
  8. 6

    AFE MOMENTUM PRO10R air box

    No issues with No Limit and snow here. Top of the fence is 51"
  9. 6

    6.4 single turbo

    PM me your email and I'll try and get it to you tomorrow
  10. 6

    6.4 single turbo

    Oh, didn't know that. This was over a year ago. I can send you the tune files, you'll just need an MCC unlock code.
  11. 6

    6.4 single turbo

    I just run the canned H&S single tune. It's a free download on their site, you just need to purchase the MCC unlock code. It's runs good, the shift points are a little high for my liking but it's not a deal breaker.
  12. 6

    6.4 single turbo

    Yeah, absolutely no need to do anything with the cab unless something goes really sideways with the up pipe bolts.
  13. 6

    6.4 single turbo

    No idea on cost, I did mine myself. The worst part will be the up pipe bolts in the factory turbos if they haven't been out for a while. Other than that it's pretty simple.
  14. 6

    6.4 single turbo

    The H&S single kit with their turbo is very close to stock drivability, obviously there is a bit more lag since you're going to a single from compounds but it's not a huge change. It makes a ton of power on stock fuel and sounds great. I never calculated mileage consistently before or after the...
  15. 6

    Updated No Limit 6.4 Intakes

    Just what I've been waiting for - where do I order just the elbow?

Latest posts

Members online

No members online now.
Top