13-16 Spartan tuning

SpartanDieselTech

New member
Joined
Jul 14, 2015
Messages
524
Reaction score
0
******* Update for 15MY/16MY Available

Version 1.1 update for 2015/2016 nGauge is available.

Please give us a call, or email tech support to receive the updated files.

v1.1 changes are as follows:

400HP calibration added
DTC P2074 fix implemented
DTC P0402 fix implemented
DTC P0236 fix implemented
Part throttle 2-3 shift minor adjustment (cleaned up the shift a bit).



I'll be putting out version 2.0 when SOTF becomes available, with more further refinements to shifting and lockup .
 

tiderancher

New member
Joined
Dec 7, 2015
Messages
28
Reaction score
0
nDash has pre-sets from us for recommended settings, warnings, etc. As soon as the configuration tools arrive from our software engineer, nGauge will come this way also. We are still working on adding parameters and cleaning up ones that are unnecessary.

Honestly, I just haven't had a chance to sit down and make a guide yet. Too many irons in too many fires.

If it was me, I'd have EOT and Trans Temp on the dash (since it saves space on nGauge). ECT, Fuel Rail Pressure, Fuel Rail Temperature, and Mass fuel (cylinder 1 is fine). Those are typically the 4 I have on mine.

I will dial this up on mine. Thanks for the support.
 

tiderancher

New member
Joined
Dec 7, 2015
Messages
28
Reaction score
0
So a question for the tech guys. Here is my vehicle info after loading the 120hp tune and then the 120hp trans tune. It shows the VIN, the strategy and the tune. Does the strategy show me that the engine tune as well as the trans tune are loaded where the tune shows the last tune uploaded? or do I need to reload the engine tune?
 

Attachments

  • 20160121_105013.jpg
    20160121_105013.jpg
    928.4 KB · Views: 134

dawashi

New member
Joined
Oct 23, 2014
Messages
58
Reaction score
0
Questions: I keep getting the P0000 : on board diagnostic system readiness test not complete
and U0102: lost comms with the transfer control module
anyone else getting these? I have a 15 running 500 race haven't completed the update yet.


Sent from my iPhone using Tapatalk
 

Ipkyss

New member
Joined
Jul 16, 2011
Messages
1,032
Reaction score
0
So a question for the tech guys. Here is my vehicle info after loading the 120hp tune and then the 120hp trans tune. It shows the VIN, the strategy and the tune. Does the strategy show me that the engine tune as well as the trans tune are loaded where the tune shows the last tune uploaded? or do I need to reload the engine tune?

you only load one tune. The engine/trans tune is all in one. the 120 race is one and the 120 enhanced trans is the same tune with a quicker converter lock up. pick one or the other
 

Ipkyss

New member
Joined
Jul 16, 2011
Messages
1,032
Reaction score
0
Just wanted to add I requested the update for my 2015 this afternoon, had it an hour later and its already loading to the truck. Can't ask for any better then that.
 

Ipkyss

New member
Joined
Jul 16, 2011
Messages
1,032
Reaction score
0
All good after the update. no more code. I would like to say something is better with the update but it was really good to begin with.

Only tip I have is don't give your faster, better sounding truck to you wife. She will rub it in your face and make you spend more money on your truck. Next step is trying to figure out what turbo I need to even things up a little :fustrate:
 

Profuzz

Member
Joined
Aug 4, 2014
Messages
194
Reaction score
0
No kidding the wife is now driving the 6.0 ! She's always telling me how much faster it is !

Sent from my SAMSUNG-SM-G870A using Tapatalk
 

Mikeyfitz

New member
Joined
Mar 22, 2015
Messages
761
Reaction score
0
Location
Houston, TX
All good after the update. no more code. I would like to say something is better with the update but it was really good to begin with.

Only tip I have is don't give your faster, better sounding truck to you wife. She will rub it in your face and make you spend more money on your truck. Next step is trying to figure out what turbo I need to even things up a little :fustrate:


Hahah! I'm trying to pawn mine off on her and get me a faster toy. She won't take it lol
 

Sharp Shooter

New member
Joined
Jan 15, 2016
Messages
18
Reaction score
0
Location
Cape Girardeau MO
Well I had a crazy week last week and never got a chance to call and place my order. It's killing me waiting until Monday now, especially when I get back on here and see people still talking about how great it is! Lol
 

bruce65trojan

New member
Joined
Apr 14, 2013
Messages
141
Reaction score
0
Version 1.1 update for 2015/2016 nGauge is available.



Please give us a call, or email tech support to receive the updated files.



v1.1 changes are as follows:



400HP calibration added

DTC P2074 fix implemented

DTC P0402 fix implemented

DTC P0236 fix implemented

Part throttle 2-3 shift minor adjustment (cleaned up the shift a bit).







I'll be putting out version 2.0 when SOTF becomes available, with more further refinements to shifting and lockup .


Just wanted to say that since I've updated my tunes so far I have not seen any codes! I uploaded the 550 Enhanced tune and the adjustments you made to the 2-3 shift are awesome! 1-6 the truck shifts awesome! And when you lay into she likes to get rowdy!! Love it so far! Great job!
 

Latest posts

Members online

No members online now.
Top