OuchThatHurt
Member
Hey guys. I have a buddy in washington Tryin to tackle his egr ***** today on his 2015. He bought a kit from a shop that pretty much machined their "own" kit after a sinister kit. The shop said the kit will work on 11+ powerstrokes... is that true?
Anyway... the dilemma he is having is the supply line from the T to the cooler is left wide open and the directions don't tell him what do do with it... the directions only talk about 2 lines, and he says he has 3. At this point if he started the truck he would be blowing coolant everywhere... the hose has a plastic twist disconnect type fitting. He understands he could cut the end off and put a plug in but he's not backyard like that.
AndY help would be greatly appreciated.
Don
Anyway... the dilemma he is having is the supply line from the T to the cooler is left wide open and the directions don't tell him what do do with it... the directions only talk about 2 lines, and he says he has 3. At this point if he started the truck he would be blowing coolant everywhere... the hose has a plastic twist disconnect type fitting. He understands he could cut the end off and put a plug in but he's not backyard like that.
AndY help would be greatly appreciated.
Don