Recent content by 617mach 1x

  1. 617mach 1x

    Need 4.10 Gears asap

    Looking for a set of 4.10 gears for the rear of my puller anyone got a set? Thanks Kevin
  2. 617mach 1x

    Build time! S400 style

    Thanks ford rules! Might know where I'm going to that picture Also my rcd 275/100 for sale 1450$ out right 1100 with your good set of injectors
  3. 617mach 1x

    Project: Rusty Red just needed a new bed.

    The springs need to be as flat as possible or concave to the pulling surface to eliminate hop, front traction bars make it hop bad Have it sag as much as you can like Morgan stated and Jared had it right, tire pressure and shocks
  4. 617mach 1x

    Need advice. Trade my 66 for a 467.7 that needsrebuild?

    I got a .90 housing for it if you end up trading
  5. 617mach 1x

    Build time! S400 style

    alittle more detail thats just a baby mock-up turbo, s400 will be used for testing
  6. 617mach 1x

    Build time! S400 style

    Thanks Matt Here a Alittle teaser of what I've been working on
  7. 617mach 1x

    68mm vgt vs s366 opinion.

    I had the Fmw 467.7, I'm moving up to a billet s475/87/.90 or 1.0 Mostly use the truck for pulling and drags but should still be streetable it you know how to drive it Big cam and head porting should also help spool up
  8. 617mach 1x

    My s475 winter project

    Mine does that with a certain tuner is tunes try a different tune for fun see what it does
  9. 617mach 1x

    Build time! S400 style

    Ok well after this weekend she's going under the knife again, Another turbo kit nothing like it has been done on a 6.0 before built bottom end with a twist Oringed heads Stage 3 cam Ported heads Custom intake Fully built/billet internals trans Front locker/spool 4.10s (I'll have the power...
  10. 617mach 1x

    sled pulling hitchs

    picked up 2.4 mph on a ****ty track, no more frame arching and plenty of front traction also was running a 2.5 plug instead of the full 68mm
  11. 617mach 1x

    sled pulling hitchs

    im blocked solid http://www.youtube.com/watch?v=Y2-xuqfnv0U you can see how much it lifts here, i wish i had a vid from the other end of the track
  12. 617mach 1x

    sled pulling hitchs

    ill have results sept 20 no limit, our 2,5 class is 20in max and 2,6 is 26in max every inch up is close to 5-15 feet more at the end of the track so trying to stay at the max could always try 19in and see how it does tho
  13. 617mach 1x

    sled pulling hitchs

    cant run hanging wieghts, only rear blocks and wieghts in the box, truck doesnt hop, not worried about that i shorten it up by 15in, that will certainly help with the front end lifting resulting in better front end traction (i know this first hand with tractor pulling our oliver, 6in lenght...
  14. 617mach 1x

    sled pulling hitchs

    nope, i have a 4link no hopping issues i need more traction upfront, cut the hitch back to the 44in limit and braced it over to rear end as the pictures show just wondering what other people have notice when doing this
  15. 617mach 1x

    68mm vgt vs s366 opinion.

    I have an s400, 467.7 to be exact, huge injectors manifold, up pipes and ported intake, I wouldn't go back to a vgt, I've even towed with this setup with no issues! Had to completely change how you come on to it, can't just stomp on it and pray it'll spool, roll into it after you have Alittle...
See more

Random media

IMG950386
crowfoot_wrench_4
IMG_3396
Alumline
2017_Stage_2_Intake
200_Fuel1
Doin It Daily Style...
IMG950396
photo_11
20160406_164240
silver_truck_drivers_side_front_house
exit_1

Latest posts

Members online

No members online now.
Total: 294 (members: 0, guests: 294)
Top