Recent content by hawker25

PO box wont work. I live in Jeffco and get tested here. For an emissions test it is one of the friendlier there is. Its a visual inspection and a smoke opacity test. Nothing plugs in to look for tuning. If it is obvious you are missing emissions pieces you will fail though. The EPA has been...

thanks for the reply. Is it a different plug i need to be looking for to go into the seat or is it a plug to go into the controller under the passenger seat in the control module? Do you have any pics? Just want to make sure I have all my ducks in a row before dropping the cash on the seats.

I have a 2014 f250 lariat with leather power seats but not heated or cool. I have an opportunity to buy a set of heated and cooled seats out of a 2016 and am trying to find out if all the wiring for the heated and cooled seats is the same. Can I just plug them in and change the programming in...

I just put them on the filter housing barbs. The others are high-pressure push locks and are designed to be used without clamps. The clamps were from another project I had. I had the same problem at napa cause they are not listed as fuel injection clamps. The ones I used are listed as...

Setup is working great No leaks or any other issues so far. Went out and did some 30mph to 75 mph punches on the highway. No hesitation or codes were thrown running #1 through #4 tunes from GDP. Really pleased with how this came out and it makes me have a little more piece of mind for the...

Sorry I dont have that. I just bolted it to the frame and marked the holes with a pencil then drilled them out. If you get the measurements Im sure others would be appreciative if you added them into the thread.

I just got GDP tunes through Ez-lynk and am very happy so far. We went back and forth a few times tweaking things to get dialed in. It had a ton of power to start but was a little smokey. I think this may have been due to the fact that I'm in Denver at altitude. I am very happy and the...

I haven't had any problems with fuel delivery yet. Im running GDP Banana Smoothie tune. I plan on changing the filter every 10K. I will report back if anything changes over time. Glad you guys like this. I just couldn't bring myself to spend $700 dollar for a kit that I knew I could make...

So i finally got everything finished up and driving around on it As promised here is a link to my thread with part numbers, where I bought the parts, and pics. http://powerstrokearmy.com/forums/showthread.php?p=1509259#post1509259

This was a fun project for me, between designing how everything would fit together and hunting down all the pieces I thoroughly enjoyed doing this. I feel like I have greatly improved the quality of fuel going through my system as well. Feel free to ask any questions and I will try to answer...

After everything is installed and tightened up, cycle your key to the on position for approx 30 seconds for but do not crank the engine. This will run the pump for 30 seconds. Look for leaks. Cycle the key 6 more times for 30 seconds a piece without cranking to fill the filter and line with...

After getting everything marked and drilled I installed the filter base to the bracket using 3/8x1 bolts with lock washers from Ace Hardware. I then Installed the fuel line from NAPA. This is high-pressure hose. Don't cheap out here and get the stuff that costs half as much. This line can be...

So first I found where I wanted to mount the bracket. There is a stud with a nut on it that is just behind the factory water separator that makes a perfect mounting point. I really liked how it was close to the factory setup and protected up inside the frame rail. You do have to trim a...

I added an auxiliary fuel filter and water separator in front of my factory water separator on my 2014 6.7. I used factory style quick connects I found online so this is easy to remove if needed for some reason. I went through many ideas and designs before I was happy with the location. I...

Did you use a sensor out of the *** and not the egr one? I had read on another site that water in one of the sensors that was unplugged from the particulate filter caused some word things to happen like that. Couple places to start anyways.