Recent content by scparrish

Wish these weren't so far away.

Early build F series harness?

Damn that's a good price. Wish I were in the market right now.

Wicked wheel for a powermax way back when and a mishimoto "upgraded" radiator about the same time. I stopped being the first one to jump in a boat after those.

Those are the connectors I was wondering about. I knew you could get replacement ends pretty easily but wasn't sure about the FICM side.

6.0 Tech got it right. You need the rubber grommet from S&B and the ccv hose from a dealer. The hose comes as one piece with both bends.

Have you found a source for the ficm plug ends yet?

I run a flowpro 5" and it came with the band clamps. It turns to 5" right around the crossmember.

Pictures of the flex a lite fans? Are they the 6.0 specific fans?

Unless you are able to make a good trade for injectors I would just plan to put 75% nozzles in and call it a day.

since these are all powerstrokes I am assuming that you likely don't have an 05-10 dana 60 with 4.30s?

500 hp is the maximum and isn't likely to be reached. The most I have seen someone get from stock sticks was 498. Your dyno numbers are limited by your fuel, I wouldn't expect to gain anymore from the stock injectors. It doesn't take a lot of fuel to see improvements. Back when I ran a S366...

The guy that put that together knows his stuff and does a really good job comparing all of the different projectors.

I did mine several years ago and used oem fx projectors, I am really happy with their output. With that said I would hands down run the morimoto mini h1 7.0 projectors if I were doing it today. They are nearly drop in. To fit the fx projectors it required a lot of cutting and sanding. Check...

It worked really well. The cooler measurements are nearly identical to the bpd standard cooler.