Search results
-
eye candy
While I Am Building My Motor I Sent A Few Things To Get Ceramic coated And This Is The Final product I Also Received My New Rods!- obspsd
- Thread
- Replies: 44
- Forum: 7.3 Aftermarket
-
valve to piston contact
Which I Have Never Done And My 910s Aren't shimmed- obspsd
- Post #10
- Forum: 7.3 Aftermarket
-
valve to piston contact
This Is.Why I Have Factory Pushrods. I'd Rather Bend A Pushrod Than Damage Something Else- obspsd
- Post #9
- Forum: 7.3 Aftermarket
-
-
7.3 hpop and injectors
Pump Is Sold Injectors Still Available- obspsd
- Post #7
- Forum: Engine and Drivetrain
-
7.3 hpop and injectors
As Of Now Everything It Is Available- obspsd
- Post #5
- Forum: Engine and Drivetrain
-
-
7.3 hpop and injectors
I Have A 15° Pump And A Set Of AA Injectors Both Came Out Of A Good running Motor With 128000 Miles. 100 For The Pump 300 For Injectors- obspsd
- Thread
- Replies: 7
- Forum: Engine and Drivetrain
-
Twin turbos worth it or not?
What Do You Plan To Do With The Truck And What Are Your Hp Goals- obspsd
- Post #2
- Forum: 7.3 Aftermarket
-
If you had to pick DI trans or Twisted Diesel trans?
I'd Go With The Twisted Trans. That's What I'm Running With 650+ hp And Never Had An Issue- obspsd
- Post #44
- Forum: 7.3 Aftermarket
-
7.3L MANLEY Rods... for sale!!
Have Any Left? Price?- obspsd
- Post #54
- Forum: Big Sky Diesel Performance
-
carnage! need billet rods
No I Didn't Notice Anything Unusual. I Eased Into It Around 2k Rpm And Held It To The Floor For Only A Few Second. Nothing Out Of The Ordinary Or Extreme- obspsd
- Post #44
- Forum: 7.3 Aftermarket
-
carnage! need billet rods
I've Seen Those pictures And That Was Wild. Right Now Rods Are My Weak Link But Once I Replace Them Then I Don't Wanna Be Cracking Blocks Every 800 miles Lol- obspsd
- Post #42
- Forum: 7.3 Aftermarket
-
carnage! need billet rods
I'm Going To Billet Rods, I'm Just Trying To Eliminate Any Major Problems I Might Have So I Don't Destroy 3k Rods- obspsd
- Post #37
- Forum: 7.3 Aftermarket
-
Poor engine...
Hope You Have Better Luck Than I Do! See You At Rudys- obspsd
- Post #9
- Forum: 7.3 Aftermarket
-
cryoed parts
Yea Haha Nontreated Factory Rods Outlasted The Cryoed Rods- obspsd
- Post #14
- Forum: Aftermarket Super Duty 1999 - Current
-
carnage! need billet rods
I Agree That It's Very Unlikely For 5 Injectors To Be Over Fueling, However I Am Going To Have Them Checked Just To Be Sure. This Isn't The First Time I've Bent A Rod(Third Time) So I'm Not building Another Motor Until I Figure Out What Is Causing This. This Motor Only Had 800 Miles On A...- obspsd
- Post #35
- Forum: 7.3 Aftermarket
-
carnage! need billet rods
Bananas In Pajamas Haha. I Understand What Your Saying But You Say Its Not Likely An Injector Issue So What Fluid Do You Think could Be My Issue. The Head Gaskets Looked Fine And The Truck Didn't Smoke.- obspsd
- Post #29
- Forum: 7.3 Aftermarket
-
carnage! need billet rods
Well I Got The Motor Torn Apart This Weekend And 5 Of The Rods Were Bent So I Believe I Have AmIssue Besides Rod Failure. Is It Possible For A Injector To overfuel And Try To Hydolock?- obspsd
- Post #26
- Forum: 7.3 Aftermarket
-
carnage! need billet rods
Here Is The Piston That Was On The Rod- obspsd
- Post #18
- Forum: 7.3 Aftermarket
