Search results

  1. W

    Free time went bad

    take a little carb cleaner, spray around the glow plugs.... then work them in and out, with a bit more cleaner.... your will get them out no problem.... Carbon build up gets around them and I personally think they dont ever burn hot enough to get it off..... Never had the problem with bosch...
  2. W

    Button shifted F350

    why not just tap the wires coming out of the bottom of the column, and not use the second clock spring?? Seems as though you could use the rt side buttons with the cruise disabled, and not have to go through all the extra work.... Just wondering :)
  3. W

    7.3l injector harness pigtail needed please

    http://www.riffraffdiesel.com/mm5/merchant.mvc?Screen=PROD&Store_Code=RRD&Product_Code=AP0015&Category_Code=FOBS-OEM
  4. W

    Weld Racing 20x12 Dakar Polished

    not to be a dick... but that aint gonna happen when guys can buy new ones for 8 hundo now a days.... good luck though...
  5. W

    4r100 compushift pcs

    so is it a compushift.... or is it a PCS???? They are not the same thing....
  6. W

    WOP injector question

    I wanns know more about the "parts truck" who gives up a truck for "parts" with injectors still in it? :)
  7. W

    Superduty 7.3 Valve covers.

    purchased a set thanks guys :)
  8. W

    Superduty 7.3 Valve covers.

    There is Really NO other difference other than already stated.... Sound levels will not change EARLY 94-95 trucks had single stamped The filler neck will fit ANY year cover.... OH and PM sent.
  9. W

    Superduty 7.3 Valve covers.

    No sir... they are not :) Superduty will have an indent on the area where the Harness goes through the cover in the center... OBS has them front and rear for the same respective item :) Hoping to find a decent non-bent set... I might have them Chromed :)
  10. W

    Superduty 7.3 Valve covers.

    Looking for a cheap set of Superduty valve covers... Engine I have has OBS ones on it... Thanks...
  11. W

    TIME FOR A REBUILD

    you got an injector issue... Broken/cracked nozzle, or just hung open... get em fixed, buy the turbo kit... and be happy it wasn't 10 grand instead of 3 :)
  12. W

    TIME FOR A REBUILD

    Fuel is in the pan because it is being pushed by the rings.....
  13. W

    TIME FOR A REBUILD

    I would guess cracked nozzle, or broken nozzle.... Unless there is a rod out the side of the block, Drain the oil, refill it, and crank it over slowly by hand first...... IMO it was a fuel knock... "hydrolocking" I bet motors fine....
  14. W

    sureflow injection

    DP TUNER is tuning mine...... Personally I would call Micheal Farmer about his injectors, and get info direct from the horses mouth.... not assumed info from a competitor.... but thats just me.... no offense.... fwiw I tow a 17,000 lb trailer, no issues....need more turbo :)
  15. W

    sureflow injection

    You have to remember this is fairly New technology in an injector.... So the tuning guys are a bit behind the curve, but are now coming around... I to had some minor issues with mine... but after a few programming tweaks, run the same... I personally think that because of the rate of...
  16. W

    Just when i decided not to mod the ile girl...

    Aluminum gears.... you can't be serious.... you know a 4r and a e40d are the same trans 95% of the way through right... :poke:
  17. W

    Injectors and tuning

    Thank you sir for proving my point.... As a matter of fact yes I have... 448 stock turbo mild tuning. in a obs... with half the injector most are running now a days.... Its in a magazine... if you like I can have a copy mailed to you.... Never actually got around to finishing the article.. I...
  18. W

    Injectors and tuning

    MAN I love internet... lots of second hand info... I personally have ran farmers injectors in 2 trucks now... and would not hesitate to run them again.. they idle perfect, drive like stock, until the foot hits the mat then hold on.... Call him.. he will talk to you and put you at ease.. he...
  19. W

    68 f250 on 01 frame

    its an 01... pcm uses the output sensor in the trans
  20. W

    Hey Jesse, DieselSite HPO Gremlin..

    LOL um yup... tard face on....:joy:

Random media

IMAG0177
IMG_1944
Campin quarters
front_axle_swap7
PART951319154316768
0618111401
photo91
307496_10150261245957927_2674404_n
photo8
BMFWheel037
IMG_39192
IMG954242

Latest posts

Members online

Total: 443 (members: 3, guests: 440)
Top