Search results

  1. FX4 F2-Fifty

    62/80 6.0 Turbo

    62/80 for a 6.0. I bought it barely used, but had it rebuilt anyway. Ive had it on my truck for 45k miles with zero issues. Has a divided T3 internally gated housing but is wired shut(no wastegate actuator). Comes with Turbo and pedestal. Everything you need to bolt it on. Always run with...
  2. FX4 F2-Fifty

    100+ PSI fuel pressure

    Yes, I just edited my other post. This was not a design flaw of the system, nor was it a failure of an original part of the fuel system. the line that is clogged, I replace a while back due to a leak in the stainless line. I was in a hurry and had it done at a local farm supply store with...
  3. FX4 F2-Fifty

    100+ PSI fuel pressure

    Think I found the problem! One of the lines off the rear of the heads is completely blocked. Guess I'll go get some lines made Monday. Edit: confirmed. Pressure difference is down to 20 psi. might just replace all the lines. Sent from my DROID BIONIC using Tapatalk 2
  4. FX4 F2-Fifty

    100+ PSI fuel pressure

    Well, put in the 6.4 banjos and still burying the gauge at over 100psi. Hooked up a new stewertson 100 psi gauge to verify. really thought that was going to do it. Back to the drawing board. Sent from my DROID BIONIC using Tapatalk 2
  5. FX4 F2-Fifty

    100+ PSI fuel pressure

    Come on by! and not so well. its been slipping in OD and not shifting right for over a year. Just recently it has started slipping all the time. Seems like the only time it shifts correctly is at the track... so thats where she will go to test out the new setup. When it goes BOOM, ive got a...
  6. FX4 F2-Fifty

    100+ PSI fuel pressure

    my banjos are actually in the rear of the heads on the return side..the check valve was removed but not drilled. Good news, got all my parts and about to start the tear down. Sent from my DROID BIONIC using Tapatalk 2
  7. FX4 F2-Fifty

    Quality or Crap aftermarket wheels

    Every set if chrome wheels I have had started to pit. RBP and D'Centi. main reason I went back with OEM. Sent from my DROID BIONIC using Tapatalk 2
  8. FX4 F2-Fifty

    100+ PSI fuel pressure

    LOL I wish. I was actually just waiting on a little part so I can start the install. Turns out there was some communication errors and I received another turbo directly from bill. Rut row. Called Bill and we got it all taken care of. Sadly it has to go back. LOL good news is that the part is...
  9. FX4 F2-Fifty

    100+ PSI fuel pressure

    Little update, was in the big city and got a phone call that I had a package waiting at home. Believing this was the part I had been waiting on, I went ahead and stopped by ford and picked up some 6.4 banjos and washers. Got home ready to start the install, turns out I received ANOTHER turbo...
  10. FX4 F2-Fifty

    Fuel bowl/filter delete ?

    Sure, I wish I had better pictures of cutting it off and cleaning it up as well. But my camera (phone) was acting up. That's the only picture I have but I will snap one later today of the finished product. Sent from my DROID BIONIC using Tapatalk 2
  11. FX4 F2-Fifty

    6.0 performance parts

    those are sold, go back a couple of post and he says what is still available. Air intake, and coolant lines. Sent from my DROID BIONIC using Tapatalk 2
  12. FX4 F2-Fifty

    Fuel bowl/filter delete ?

    Cut off tool, grinder, and flapper wheel work too. LOL makes things quite a bit cleaner and easier to remove considering a harness runs between them. Sent from my DROID BIONIC using Tapatalk 2
  13. FX4 F2-Fifty

    100+ PSI fuel pressure

    Will do! Sent from my DROID BIONIC using Tapatalk 2
  14. FX4 F2-Fifty

    Voltage regulator for A-1000 Fuel pump

    Did he tell you to do the regulator before the heads? And buy a fancy fuel block?and feed from both sides of the heads? I got the same lecture when he asked if I owned a Powerstroke. LOL Sent from my DROID BIONIC using Tapatalk 2
  15. FX4 F2-Fifty

    100+ PSI fuel pressure

    Ok good to know. I have the same kit. what banjo bolts did you use? Did the kit come with them or did you reuse the ones from the front? I bought my kit used so this is why i'm asking. Thanks again. Sent from my DROID BIONIC using Tapatalk 2
  16. FX4 F2-Fifty

    100+ PSI fuel pressure

    So you have hardlines and banjos in the rear of the heads? Then the stainless braided lines connect to the hardlines above the rear of the motor then to the regulator?
  17. FX4 F2-Fifty

    100+ PSI fuel pressure

    THANK YOU :bowfast::bowfast::bowfast: Thats exactly what i wanted to know. Do you mind sharing your setup? Pump, reg, etc. I should be stripping mine down here in the next couple of days. Still waiting on parts for the mini tear down. My money is on the banjos and hardlines on the rear of...
  18. FX4 F2-Fifty

    Fuel bowl/filter delete ?

    Hopefully neither! LOL Just wondering as i am currently having fuel pressure issues. Sorry for the derail OP.
  19. FX4 F2-Fifty

    Fuel bowl/filter delete ?

    Have you measured pressure at the front and back of the heads? Rear crossover does not do anything about dead heading. Sent from my DROID BIONIC using Tapatalk 2
  20. FX4 F2-Fifty

    Fuel bowl/filter delete ?

    my bad, not too familiar with the AD. with that said, seems like you could just do as said above. Sent from my DROID BIONIC using Tapatalk 2
View older results

Random media

429973_3241504444108_2082823257_n
The Truck at Angler's Choice
Correct sealing surface
Magneto_side_v2
INJECTORS B/W
6.7 Ford w/MPD pedestal
7
BODY1
Smokyred
53
Magneto_rear_v2
truck23

Latest posts

Members online

No members online now.
Total: 428 (members: 0, guests: 428)
Top