Search results

  1. B

    Excessive blow by?

    Copy that. I appreciate the info. I will test it here in a bit.
  2. B

    Excessive blow by?

    I am wondering if this is excessive? I don't have a video but I found one on youtube that has just a bit more than mine. Here is the link. What do you guys think? Is this to much or does it look ok? I only have 60k on the truck but its an f450 with 4.30's I have a feeling the high rpm's are...
  3. B

    4.30 gears from excursion

    I don't know if your doing it wrong or not but I know from first hand experience that 4.56's and 38's was like a stock truck with 4.10's or maybe just a tad lower.
  4. B

    4.30 gears from excursion

    I would go with it. I ran 4.56's in my excursion when I had 38's on it. It was a little to low of a gear so 4.30's should be just about like stock in my opinion.
  5. B

    22.5 AF Independence

    Man I want to take these off your hands but I have no use for those tires up here not to mention shipping for the whole setup is going to be stupid. If you decide you want to sell just the wheels let me know.
  6. B

    6" lift 2008-2010 trucks

    The part number that comes back to my serial number is 10983BB. It's a 66/65 ball bearing.
  7. B

    6" lift 2008-2010 trucks

    Ok. I will call them today and see what I can come up with.
  8. B

    6" lift 2008-2010 trucks

    Turbonetics hasn't called me back. I have left two messages. I will try again tomorrow. To tell you the truth I kind of left it alone because I wasn't sure if your friend was interested.
  9. B

    6" lift 2008-2010 trucks

    That's fine I understand. No worries here. I will try and get a part number from Turbonetics tomorrow for you. I wasn't sure if the website link was going to work or not.
  10. B

    6" lift 2008-2010 trucks

    Are you still interested in the information for the turbo? If not it's no big deal it was a longshot anyways.
  11. B

    6" lift 2008-2010 trucks

    I am not sure if this will work but here. http://www.turboneticsinc.com/store/index.php?route=checkout/cart
  12. B

    6" lift 2008-2010 trucks

    Ya I can shoot you a screen shot of the turbo as it is built minus the extra addition for the larger v band. Its straight from turbonetics if that helps.
  13. B

    6" lift 2008-2010 trucks

    I will have to actually call turbonetics to get a part number. I just went to their site and built the same turbo hoping to get a part number of some sort but all I got was the part number for the compressor wheel setup and one for the turbine side. The actual part number isn't available for the...
  14. B

    6" lift 2008-2010 trucks

    I would have to look up the part number because it isn't stamped on it an I don't remember what it is right off hand. It's a t-66. With the ball bearing center section. All the rest other than the exhaust housing is off the shelf. The outlet for the down pipe is 3.5" v band flange. That is the...
  15. B

    6" lift 2008-2010 trucks

    No worries. The serial number is t-40021 It has a .81 a/r exhaust housing in it.
  16. B

    6" lift 2008-2010 trucks

    I will go out and take one. It's not water cooled and I will get the part number for ya.
  17. B

    6" lift 2008-2010 trucks

    I will have to check but I am pretty sure this is the 66.
  18. B

    6" lift 2008-2010 trucks

    Compressor side- 65.44 mm inducer 90.92 mm exducer Exhaust side- 74.13 mm inducer 64.48 mm exducer
  19. B

    Baking headlights.

    Whatever you do, DON'T paint the headlight bucket that the bulb reflects off of. Ask me how I know. The set I had received a burn from bad hid's. They look cool but don't work worth a crap!

Latest posts

Members online

No members online now.
Top