Search results
-
TC Lockup in OD
I will try and pull the codes this weekend. weird thing is when I tune it with my SCT3 the code will not come up and the tow light won't blink. but as soon as I go back to stock the light will start blinking when I get up to speed. -
TC Lockup in OD
honestly I can't remember the code, but it was for a fault for the torque converter solenoid. so I replaced it and the tow light still flashes. -
04 6.0 Deltas GURU's
checked the lower hose compared to the upper hose and they felt like they were the same temp. I don't have a temp gun I just used my hand. So by that theory either the rad is clogged, or it is just whipping through there and not cooling it, or the water pump is going out. thoughts? -
TC Lockup in OD
I will add it will shift in and out consistently of 5th and 6th then my tow light will start flashing. new, fluid, filter and gasket -
TC Lockup in OD
fellas, here's my problem. 2004 f350, 5R110W tranny will not stay locked up 6th gear on the highway. threw a code about TC lockup, replaced the solenoid and its still doing it. Could it be the TC? any advice will help. i'm about to the point on this pickup to just replace the rest of the... -
1953 F250 Powerstroke RatRod
sweet build man and way to stay with it and not half a** it.- Jtreece
- Post #222
- Forum: Project Forum
-
Garage clean out. Tons of parts 7.3 6.0 Superduty OBS
can you pm me the 6.0 engine bay harness?- Jtreece
- Post #4
- Forum: Engine and Drivetrain
-
04 6.0 Deltas GURU's
that's actually the next plan. I just read on another post a guy did the same thing and uses the gel lime away capped it and let it foam up till it came out of the lower rad hose, let it set 2-3 mins and did that 4-5 times, flushed it for awhile, filled the system up with distilled water ran... -
AKF250 Alaska Build - (650-700HP BUILD)
sweet build man you dropped some serious coin on this one. I miss Alaska I worked up on the slope for a year and been trying to come back ever since. can wait to see this thing run!!!- Jtreece
- Post #98
- Forum: 6.4 Aftermarket
-
04 6.0 Deltas GURU's
I also had a 20 degree delta yesterday on the way home at 65mph and 80 degrees. 193ect and 213eot with no AC on. -
04 6.0 Deltas GURU's
Yes. but before the cooler was changed, twice actually then ran it awhile then swapped it. -
04 6.0 Deltas GURU's
about 20 mins. coolant was changed during last oil cooler swap so 2500 miles ago. why do you think its not clogged? -
Will dual steering stabilizers help the "hunt"?
sounds like it may be the steering box?- Jtreece
- Post #6
- Forum: 94-97 Aftermarket
-
04 6.0 Deltas GURU's
Well fellas, looks like i'm in for another oil cooler only after 2 months 2500 miles later.. deltas were touching 14ish yesterday on cruise at 60mph with AC on flat ground unloaded....FML!!!!! -
Will dual steering stabilizers help the "hunt"?
Good looking OBS. My 04 has a 4" and 35's 13.5 wide and duel dual stabilizer's and it still likes to wander sometimes. My whole front end is rebuilt as well, its just the wider tires pulling on grooves in the road. But if you added them it won't hurt anything and should help some.- Jtreece
- Post #3
- Forum: 94-97 Aftermarket
-
Oil pan cooler???
I saw the bad reviews as well, I didn't know if anyone on here has used one. From what he said it doesn't cause pressure issues and it comes with a controller to control flow pressure. All it basically does is recirculate and cool oil. I never felt like I needed one I guess just really... -
Oil pan cooler???
Has anyone ever used the oil cooling system from Ford Performance Specialist out of Atlanta Georgia? The kit sells for $800 and comes with a big 12"x12" B&M Super cooler, rotary vane oil pump, lines, fittings and adjustable controller. To install the kit, the hose fittings must be welded to the... -
New to 'strokes, seems to be running crazy hot
did you ever figure it out? I'm curious -
04 6.0 Deltas GURU's
Zeb, if you're asking if I have installed the OEM radiator yet the answer is no. I work to much to have fun! plus I have to send them both in to get pressure tested and have them cleaned. I got both of them free so I want to be sure they are up to par before putting 1 one in.
Members online
No members online now.