Search results
-
Compression test results
Jcv1990 I didn't know you could get the tester separate. I'll have to ask my snapon guy about it. Tycorr thanks for clearing that up. So it looks like my motor is healthy then -
Compression test results
I have no cold start issues other then then normal cold start smoke. I'm in Illinois so not much altitude here. -
Compression test results
I was questioning how accurate the harbor freight tester was. I just had a hard time justifying the cost of the snapon tester for me to only use it once. -
Compression test results
Thanks for the input. That's also assuming my gauge sealed completely and gave me an accurate reading too. -
Compression test results
Just looking for some input on the results I got from doing a compression test on my engine. Truck has 175k on it and I'm not burning any oil. Test was done with a home made harbor freight compression tester. Cylinders 1- 360psi 2-360psi 3-375psi 4-360psi 5-375psi 6-360psi 7-360psi 8-360psi... -
Honey Badger Jr
I too have had a bad experience with them as far as tuning goes. They are impossible to get ahold of. It's a shame because I wanted to use there pump but after the experience I had with and and after seeing this I won't go back.- psdguy95
- Post #2
- Forum: 7.3 Aftermarket
-
-
WTB f250 stock lift blocks for 2002.
Pm sent- psdguy95
- Post #3
- Forum: Suspension, Drive Train, and Tires
-
WTB f250 stock lift blocks for 2002.
I'm in need of a set of factory f250 rear blocks if anyone has a set they want to sell.- psdguy95
- Thread
- Replies: 2
- Forum: Suspension, Drive Train, and Tires
-
7.3 performance
I'm still interested in the turbo kit too depending on whose ahead of me on the list.- psdguy95
- Post #23
- Forum: Aftermarket Performance
-
Let's talk seat covers gentleman
Those carhartt seat covers fit really nice. I test drove a 2011 that had them and they seemed to fit good.- psdguy95
- Post #7
- Forum: Aftermarket Super Duty 1999 - Current
-
Superduty S400 Irate T4 Kit
Is it just the t4 kit or does it come with the turbo?- psdguy95
- Post #4
- Forum: Aftermarket Performance
-
7.3 aftermarket parts for sale
Let me know if the sale on the head studs falls through. I want the fluidampr and piston cooling jets.- psdguy95
- Post #4
- Forum: Aftermarket Performance
-
7.3 performance
Sent you a pm awhile ago about the t4 kit man.- psdguy95
- Post #19
- Forum: Aftermarket Performance
-
238/80 injector issue
True. I didn't think about it like that. Thanks for clearing that up. I will get an ipr ordered and throw it in when I get back from my trip to Tennessee next week. Another thing I noticed is that my icp sensor reads 14psi koeo after sitting all night. Is this normal? I'm so used to working on... -
7.3 performance parts for sale
Let me know if the sale on the head studs falls through- psdguy95
- Post #5
- Forum: Aftermarket Performance
-
238/80 injector issue
I shouldn't say it's a random rough idle. It feels more like a random miss fire. The whole engine and truck shakes when it does it. But it smooths out as soon as I start giving it throttle. If I run a buzz test all 8 injectors buzz. My fuel pressure is good too. I don't have s scan tool but I... -
238/80 injector issue
My ipr duty cycle when it's running smooth or not is about 10.9% ish. Icp fluctuates too fast for me to read it but I thinks it's between 450 and 550psi at idle. -
238/80 injector issue
I am using amsoil 5w40. I have 500 miles on the oil since it was changed. I had my tuner tweak the tunes and its cured the loping on start up. But I'm still fighting the random rough idle. -
238/80 injector issue
Do they even make split shot 238/80s? I'm assuming they wrote the tunes as single shots. I didn't say they were or not. I questioned the ipr myself but the odd thing is I can put the stock injectors in and put my canned tunes back in and the truck runs just fine
Members online
No members online now.